The Characteristics of QuickDASH for Workers in the Manufacturing Industry (제조업 종사자의 근골격계 통증에 따른 QuickDASH의 특성)

김장곤; 강진우

The Characteristics of QuickDASH for Workers in the Manufacturing Industry

Korean Journal of Occupational Therapy
Abbr : Korean J of Occup Ther
2013, 21(1), pp.107-118
Publisher : Korean Society Of Occupational Therapy
Research Area : Medicine and Pharmacy > Working Therapeutics

김장곤 ¹, 강진우 ²

¹영동대학교
²가톨릭대학교 의과대학 직업환경의학과

Accredited

ABSTRACT

Objective : The purpose of this study was to evaluate to what extent the QuickDASH score has on manufacturing workers in a particular area in terms of managing musculoskeletal disorders among subjects with and without pain. In addition, we intended to see whether there are any differences in QuickDASH scores in terms of pain, whether any part of the score is more closely associated with musculoskeletal disorders, and whether we can distinguish people who know what the score is to a certain extent from those who don’t. Methods : A QuickDASH survey was conducted on 2,190 manufacturing production workers with upper extremity musculoskeletal symptoms only. To see any differences in the scores, their upper extremity musculoskeletal symptoms were measured using survey results from QuickDASH, an ROC analysis used to measure sensitivity and specificity. Results : There was a statistically significant difference in the QuickDASH scores of subjects with pain in their neck, shoulder, arm/elbow, and hand/finger between symptomatic and asymptomatic subjects. When a certain body area such as the neck, shoulder, arm/elbow, and hand/finger was not distinguished, in the case of subjects with symptoms in any body area, and the symptom-free subjects did not show any difference depending on the subject type even when the QuickDASH sensitivity and specificity were 77.0% and 63.5%,respectively, the number of critical points was 24.9, and AUC was .776. Conclusion : This study shows that QuickDASH can be used as an arm function assessment tool for musculoskeletal disorders of the upper extremities.

KEYWORDS

Musculoskeletal disorders, Upper extremity functions, QuickDASH, Work performance

Citation status

* References for papers published after 2023 are currently being built.

[journal] 김규상 / 2010 / Determining the Degree of Disability in Workers with Upper Limb Musculoskeletal Disorders using DASH / 대한인간공학회지 / 대한인간공학회 29(3) : 311~320

[journal] 김규상 / 2009 / The Effects of Disabilities of the Upper Extremities on Daily Activities of Workers in Manufacturing Industry, and the Factors Influencing Those Disabilities / Annals of Occupational and Environmental Medicine / 대한직업환경의학회 21(2) : 115~130

[journal] 김재용 / 1999 / Receiver Operating Characteristic 분석법 을 이용한 업무관련성 근골격계질환 설문지 개발 / 예 방의학회지 32(3) : 361~373

[book] 노동부 / 2009 / 산업안전통계 / 노동부

[journal] 이수진 / 2008 / Discriminating of ADHD Children with K-CBCL subscales:A Receiver Operating Characteristic (ROC) Analysis / 한국심리학회지 임상 / 한국임상심리학회 27(1) : 191~207

[journal] 임재영 / 2005 / 한국어 DASH 설문지의 신뢰도, 타당성 및 반응성 / 대한수부 외과학회지 10(4) : 192~198

[thesis] 지현경 / 2008 / 체질량지수와 근골격계 손상의 관련성 : 국민건강영양조사 제3기(2005년) / 석사 / 연세대학교 보건대학원

[book] 한국산업안전공단 산업안전보건연구원 / 2005 / 작업 특성에 따른 인간공학적 유해요인 평가방법 도구 개발에 관한 연구 / 대한산업보건협회

[book] 한국산업안전공단 / 2008 / 근골격계부담작업 유해요인조사 지침 / 한국산업안전 공단

[journal] Angst, F. / 2009 / How sharp is the short QuickDASH? A refined content and validity analysis of the short form of the disabilities of the shoulder, arm and hand questionnaire in the strata of symptoms and function and specific joint conditions / Quality of Life Research 18 : 1043~1051

[journal] Beaton, D. E. / 2001 / Measuring the whole or the parts? Validity, reliability, and responsiveness of the disabilities of the arm, shoulder, and hand outcome measure in different regions of the upper extremity / Journal of Hand Therapy 14(2) : 128~146

[book] Bruce, P. / 1997 / Musculoskeletal Disorders and Workplace Factors / U. S. Department of Health and Human Services(DHHS) : 469~484

[journal] Cordobes-Gual, J. / 2008 / Prospective study of the functional recovery after surgery for thoracic outlet syndrome / European Journal of Vascular and Endovascular Surgery 35(1) : 79~83

[journal] Gummesson, C. / 2003 / The Disabilities of the Arm, Shoulder and Hand(DASH)outcome questionnaire : Longitudinal construct validity and measuring self-rated health change after surgery / BMC Musculoskeletal Disorders 4(1) : 11~

[journal] Hudak, P. L. / 1996 / Development of an upper extremity outcome measure : The DASH(Disabilities of the Arm, Shoulder and Hand) / American Journal of Industrial Medicine 29 : 602~608

[journal] Ishikawa, H. / 2008 / The patient-based outcome of upper-extremity surgeries using the DASH questionnaire and the effect of disease activity of the patients with rheumatoid arthritis / Clinical Rheumatology 27 : 967~973

[journal] Kitis, A. / 2009 / DASH questionnaire for the analysis of musculoskeletal symptoms in industry workers : A validity and reliability study / Applied Ergonomics 40(2) : 251~255

[journal] Klum, M. / 2012 / Normative data on wrist function / Journal of Hand Surgery 37 : 2050~2060

[journal] Lee, J. Y. / 2008 / Cross-cultural adaptation and clinical evaluation of a Korean version of the disabilities of arm, shoulder, and hand outcome questionnaire(KDASH) / Journal of Shoulder and Elbow Surgery 17(4) : 570~574

[journal] MacDermid, J. C. / 2007 / Validity of self-report measures of pain and disability for persons who have undergone arthroplasty for osteoarthritis of the carpometacarpal joint of the hand / Osteoarthritis and Cartilage 15(5) : 524~530

[journal] Punnett, L. / 2004 / Work-related musculoskeletal disorders : The epidemiologic evidence and the debate / Journal of Electromyography and Kinesiology 14(1) : 13~23

[journal] Raven, E. E. / 2008 / Construct validity and reliability of the Disability of Arm, Shoulder and Hand questionnaire for upper extremity complaints in rheumatoid arthritis / Journal of Rheumatology 35 : 2334~2338

[journal] Silverstein, B. A. / 1997 / Work-related musculoskeletal disorders: Comparison of data sources for surveillance / American Journal of Industrial Medicine 31(5) : 600~608

[journal] Tashijian, R. Z. / 2008 / A comparison of prospective and retrospective assessment of functional outcome after rotator cuff repair / Journal of Shoulder and Elbow Surgery 17 : 853~859

[journal] Turchin, D. C. / 1998 / Validity of observer-based aggregate scoring systems as descriptors of elbow pain, function, and disability / Journal of Bone and Joint Surgery American Volume 80(2) : 154~162

KJCKorea
Journal Central

Korean Journal of Occupational Therapy 2023 KCI Impact Factor : 0.81