KJCKorea
Journal Central

@article{ART001777976},
author={Chun Du Hwan and Si Woo Park and Jung Han Kim},
title={A Numerical Study for Design Optimization of Nozzle Injection Angle in Tenter Machine},
journal={Textile Coloration and Finishing },
issn={1229-0033},
year={2013},
volume={25},
number={2},
pages={134-139},
doi={10.5764/TCF.2013.25.2.134}

TY - JOUR
AU - Chun Du Hwan
AU - Si Woo Park
AU - Jung Han Kim
TI - A Numerical Study for Design Optimization of Nozzle Injection Angle in Tenter Machine
JO - Textile Coloration and Finishing
PY - 2013
VL - 25
IS - 2
PB - The Korean Society Of Dyers And Finishers
SP - 134
EP - 139
SN - 1229-0033
AB - A tenter is very important to dry and heat-set fabrics in textile dyeing and finishing industry. However, the tenter machine typically utilizes more than 80% of all the power in dyeing system, and yet is one of the primary machine which affects quality of fabrics. Therefore, performance optimization of the tenter machine is required to reduce energy consumption and enhance quality of fabrics. To optimize the tenter machine, it is important to maintain the uniform flow rate, which can be obtained by optimizing a nozzle geometry. In this study, emboss hole angle was investigated as main parameter in flow rate uniformity and heat flux efficiency. The analysis results were compared with those acquired from bench-scale dryer test in the laboratory. The tenter machine performance simulated by Computational Fluid Dynamics(CFD) was optimized by controlling emboss hole angle.
KW - tenter;optimization;computational fluid dynamics;flow rate uniformity;heat flux efficiency
DO - 10.5764/TCF.2013.25.2.134
ER -

Chun Du Hwan, Si Woo Park and Jung Han Kim. (2013). A Numerical Study for Design Optimization of Nozzle Injection Angle in Tenter Machine. Textile Coloration and Finishing , 25(2), 134-139.

Chun Du Hwan, Si Woo Park and Jung Han Kim. 2013, "A Numerical Study for Design Optimization of Nozzle Injection Angle in Tenter Machine", Textile Coloration and Finishing , vol.25, no.2 pp.134-139. Available from: doi:10.5764/TCF.2013.25.2.134

Chun Du Hwan, Si Woo Park, Jung Han Kim "A Numerical Study for Design Optimization of Nozzle Injection Angle in Tenter Machine" Textile Coloration and Finishing 25.2 pp.134-139 (2013) : 134.

Chun Du Hwan, Si Woo Park, Jung Han Kim. A Numerical Study for Design Optimization of Nozzle Injection Angle in Tenter Machine. 2013; 25(2), 134-139. Available from: doi:10.5764/TCF.2013.25.2.134

Chun Du Hwan, Si Woo Park and Jung Han Kim. "A Numerical Study for Design Optimization of Nozzle Injection Angle in Tenter Machine" Textile Coloration and Finishing 25, no.2 (2013) : 134-139.doi: 10.5764/TCF.2013.25.2.134

Chun Du Hwan; Si Woo Park; Jung Han Kim. A Numerical Study for Design Optimization of Nozzle Injection Angle in Tenter Machine. Textile Coloration and Finishing , 25(2), 134-139. doi: 10.5764/TCF.2013.25.2.134

Chun Du Hwan; Si Woo Park; Jung Han Kim. A Numerical Study for Design Optimization of Nozzle Injection Angle in Tenter Machine. Textile Coloration and Finishing . 2013; 25(2) 134-139. doi: 10.5764/TCF.2013.25.2.134

Chun Du Hwan, Si Woo Park, Jung Han Kim. A Numerical Study for Design Optimization of Nozzle Injection Angle in Tenter Machine. 2013; 25(2), 134-139. Available from: doi:10.5764/TCF.2013.25.2.134

Chun Du Hwan, Si Woo Park and Jung Han Kim. "A Numerical Study for Design Optimization of Nozzle Injection Angle in Tenter Machine" Textile Coloration and Finishing 25, no.2 (2013) : 134-139.doi: 10.5764/TCF.2013.25.2.134