Properties of Silicon-deposited Meta-aramid Fabrics by RF Magnetron Sputtering (RF 마그네트론 스퍼터링에 의해 실리콘이 증착된 메타아라미드 직물의 성질 분석)

박종현; Sun Young Lee (이선영); Chun Su Kim (김춘수); KANG SONGHEE (강송희); Kim Eui Hwa (김의화); Seung Goo Lee (이승구)

Properties of Silicon-deposited Meta-aramid Fabrics by RF Magnetron Sputtering

Textile Coloration and Finishing
Abbr : Text. Color. and Finish.
2017, 29(1), pp.18-24
Publisher : The Korean Society Of Dyers And Finishers
Research Area : Engineering > Fiber Engineering > Dyeing Engineering
Published : March 27, 2017

박종현 ¹, Sun Young Lee ², Chun Su Kim ¹, KANG SONGHEE ², Kim Eui Hwa ³, Seung Goo Lee ²

¹충남대학교 유기소재공학과
²충남대학교
³신한대학교

Accredited

ABSTRACT

Meta-aramid fabric has been widely used as the reinforcement of composites due to its high flame resistance and tearing strength. Functionality such as abrasion resistance of fabric is very important for specialty fabrics used in car racing suits. In this study, to improve abrasion resistance property of meta-aramid fabric, silicon deposition was conducted by utilizing RF magnetron sputtering. The sputtering process parameters effects were investigated as sputtering power and substrate temperature. The obtained results suggest that the silicon deposition on the meta-aramid fabric has obvious effect upon increasing the abrasion resistance, the thermal insulation and the electric resistance condition for silicon deposition was established. In conclusion, the results of this study have made it possible to manufacture meta-aramids with higher abrasion strength.

KEYWORDS

meta-aramid fabric, silicon deposition, RF magnetron sputtering, sputtering power, abrasion resistance

Citation status

* References for papers published after 2023 are currently being built.

[journal] N. N. Baeva / 2007 / Sorption and Densitometric Properties ofMeta/Para-aramid Fibres / Fibre Chemistry 39(3) : 205~

[journal] C. C. Foo / 2007 / Mechanical Properties ofNomexMaterial andNomexHoneycomb Structure / Composite Structures 80(4) : 588~

[journal] L. Yao / 2012 / Fabrication ofMetaaramid Fibrid by Precipitation / Fibers and Polymers 13(3) : 277~

[journal] I. Padleckiene / 2013 / Mechanical and Thermal Properties ofMeta-aramid, Viscose FR and Polyester FR Knitted Materials / Mechanika 18(5) : 174~

[journal] L. R. Yao / 2011 / The Microstructure and Mechanical Property of Meta-aramid Nanofiber Web for High Temperature FilterMedia, In: AdvancedMaterials Research / Trans Tech Publications 175(4) : 318~

[journal] K. Ramani / 1998 / Silicon Sputtering as a Surface Treatment to Titanium Alloy for Bonding with PEKEKK / International J. of Adhesion and Adhesives 18(6) : 401~

[journal] L. A. Marques / 1997 / Dose Effects on Amorphous Silicon Sputtering byArgon Ions : AMolecularDynamics Simulation / J. of Applied Physics 81(3) : 1488~

[journal] G. Xu / 2003 / Optical Investigation of SiliconNitride Thin FilmsDeposited by RF Magnetron Sputtering / Thin Solid Films 425(1) : 196~

[journal] M. Vila / 2003 / Mechanical Properties of Sputtered Silicon NitrideThin Films / J. ofApplied Physics 94(12) : 7868~

[journal] A. Bendjerad / 2017 / RFMagnetron Sputtering Deposition ofNiO/NiBilayer andApproach of theMagnetic Behavior using the PreisachModel / J. of Magnetism andMagneticMaterials 428 : 377~

[journal] Y. Ishil / 2017 / Fabrication of Amorphous Silicon Nitride Thin Films by Radio-Frequency Sputtering Assisted by an Inductively Coupled Plasma / Thin Solid Films 624(10) : 49~

KJCKorea
Journal Central

Textile Coloration and Finishing KCI Impact Factor : 0.0