Dyeing Characteristics and Mechanical Properties of High Tenacity Polyethylene(HTPE) Filament using Solvent Dyes (솔벤트 염료를 이용한 고강도 폴리에틸렌(HTPE) 필라멘트사의 염색성 및 기계적 물성 평가)

JeongHoon LEE (이정훈); 이범영; 이승오; 최경용; 고재왕; Jungsoo Kim (김정수); Taekyeong Kim (김태경); Lee Seung Geol (이승걸)

Dyeing Characteristics and Mechanical Properties of High Tenacity Polyethylene(HTPE) Filament using Solvent Dyes

Textile Coloration and Finishing
Abbr : Text. Color. and Finish.
2017, 29(3), pp.105-114
Publisher : The Korean Society Of Dyers And Finishers
Research Area : Engineering > Fiber Engineering > Dyeing Engineering

JeongHoon LEE ¹, 이범영 ², 이승오 ³, 최경용 ⁴, 고재왕 ⁵, Jungsoo Kim ⁵, Taekyeong Kim ⁶, Lee Seung Geol ¹

¹부산대학교
²부산대학교 유기소재시스템공학과
³동명기술(주)
⁴경은산업(주)
⁵한국신발피혁연구원
⁶경북대학교

Accredited

ABSTRACT

High tenacity polyethylene(HTPE) fiber is one of the most important synthetic fibers which possesses outstanding properties such as low density, excellent surface hardness and scratch resistance, superior electrical insulation and low cost. In this study, we dyed high tenacity polyethylene filaments using three different solvent dyes based on log P calculations. We evaluated the dyeing characteristics of dyed high tenacity polyethylene filaments based on dyeing temperature, dyeing time and concentration of solvent dyes. We also analyzed the tensile strength and elongation properties of dyed high tenacity polyethylene filaments with various dyeing temperature and dyeing times. The optimized dyeing condition can be found at 120℃ for dyeing time of 1 hour with 4%(o.w.f.) of solvent dyes.

KEYWORDS

solvent dyes, high tenacity polyethylene(HTPE), hydrophobicity, logP, mechanical properties, dye uptake

Citation status

* References for papers published after 2023 are currently being built.

[other] E. P. Kim / 2013 / Dyeing Method of Ultra High Molecular Weight Polyethylene Fiber and Work Glovesmade from Dyed Ultra High Molecular Weight Polyethylene Fiber using This / KR101287041B1

[other] T. K. Kim / 2012 / Dyeing Method of Ultra-High Molecular Weight Polyethylene / KR10-1172860-0000

[other] Y. A. Son / 2016 / DyeingMethod of Polyolefine Based Fiber / KO10-1590732-0000

[book] S. U. Kim / 2012 / Steel Fiber Floating in Water, Ultra High Molecular Weight Polyethylene / DYETEC : 1~19

[journal] P. Smith / 1980 / Ultra-High-Strength Polyethylene Filaments by Solution Spinning-Drawing / J. of Materials Science 15(2) : 505~

[journal] 김태경 / 2013 / Synthesis of a Super Hydrophobic Violet Dye for Pure Polyolefin(PP/UHMWPE) Fib / 한국염색가공학회지 / 한국염색가공학회 25(3) : 165~171

[journal] 김태경 / 2014 / Synthesis of Super Hydrophobic Orange Dyes Having Maximum Absorption at 450-500nm for Pure Polyolefin Fibers / 한국염색가공학회지 / 한국염색가공학회 26(3) : 165~172

[journal] 조나영 / 2016 / Synthesis of Bluish-green Dyes for Pure Polyolefin Fibers / 한국염색가공학회지 / 한국염색가공학회 28(3) : 156~163

[journal] 김태경 / 2015 / Synthesis of Super Hydrophobic Disazo Red Dyes Using Alkylanilines as Diazo Components / 한국염색가공학회지 / 한국염색가공학회 27(1) : 27~34

[journal] R. Mannhold / 2009 / Calculation of Molecular Lipophilicity: State-of-the-art andComparison of Log PMethods onMore than 96,000Compounds / J. of Pharmaceutical Sciences 98 : 861~

[journal] 김태경 / 2009 / Calculation and Analysis of Hydrophobicity of the Dyes Synthesized for Unmodified Polypropylene Fibers Using Molecular Descriptors / 한국염색가공학회지 / 한국염색가공학회 21(5) : 21~26

[journal] T. K. Kim / 2009 / Synthesis and Application of Alkyl-SubstitutedDisazoYellowDyes forUnmodified Polypropylene Fiber / Fibers and Polymers 10(2) : 148~

[journal] 박종호 / 2005 / Synthesis and Dyeing Properties of Red Disperse Dyes Derived from Diaminopyridines / 한국염색가공학회지 / 한국염색가공학회 17(6) : 1~10

[other] Tongyi Middle Special Type Xianwei Technolofy Department LimitedCompany / 2013 / An Ultra-High Molecular Weight Polyethylene FiberDyeingMethod / CN2013-10744307

[journal] 김태경 / 2007 / The Coloration Properties of Alkyl-substituted Anthraquinoid Dyes for Pure Polypropylene Fiber / 한국염색가공학회지 / 한국염색가공학회 19(6) : 28~34

[journal] T. K. Kim / 2011 / Synthesis andApplication ofAlkyl-SubstitutedRedDyes forUnmodified Polypropylene Fibers / Fibers and Polymers 12 : 174~

[journal] A. K. Ghose / 1998 / Prediction of Hydrophobic(Lipophilic) Properties of Small Organic Molecules using Fragmental Methods:An Analysis of ALOGP and CLOGP Methods / The J. of Physical Chemistry A 102 : 3762~

[journal] K. R. Cousins / 2011 / Computer Review of Chem Draw Ultra 12.0 / J. of AmericanChemical Society 133 : 8388~

[confproc] I. V. Tetko / 2016 / ALOGPS(HTTP://WWW. VCCLAB. ORG) is a Free on-Line Program to Predict Lipophilicity and Aqueous Solubility of ChemicalCompounds / Abstracts of Papers of the American Chemical Society : U608~U608

[journal] X. Y. Wang / 1987 / Melting of UltrahighMolecularWeight Polyethylene / J. of Applied Polymer Science 34 : 593~

[journal] E. W. Lee / 2002 / A Study on the Structure and Mechanical Properties of Isothermally Annealed After Elevated Heating of Drawn PP Filaments / J. of The Korean Society of Industrial Application 5(4) : 361~

[journal] S. H. Yoon / 2001 / The Interpretation ofDyeingBehavior of Poly(Trimethylene Terephthalate) Fiber with a Disperse Dye / Textile Coloration and Finishing 13(4) : 249~

[journal] K. S. Ko / 1970 / Strength Tests of Imported NYLON 6 and its Variation After Dying / The Korean Society of Fisheries Technology 6(1) : 14~

[journal] E. W. Lee / 2003 / A Study on the Structure and Mechanical Properties of Isothermally Annealed After Elevated Heating of PET Filaments / J. of The Korean Society of Industrial Application 6(4) : 387~

[journal] 정인일 / 2011 / Supercritical Fluid Dyeing of Polyester Fiber with Two Different Dispersion Dyes / 청정기술 / 한국청정기술학회 17(2) : 110~116

[journal] D. J. Han / 2003 / DisperseDyes: ADyeChemists Perspectives / Aatcc Review 3(1) : 17~

KJCKorea
Journal Central

Textile Coloration and Finishing KCI Impact Factor : 0.0