본문 바로가기
  • Home

Study on the Heat Performance of CNT/carbon Fiber Plane Heater

  • Textile Coloration and Finishing
  • Abbr : Text. Color. and Finish.
  • 2020, 32(1), pp.65-71
  • DOI : 10.5764/TCF.2020.32.1.65
  • Publisher : The Korean Society Of Dyers And Finishers
  • Research Area : Engineering > Fiber Engineering > Dyeing Engineering
  • Received : November 18, 2019
  • Accepted : January 16, 2020
  • Published : March 27, 2020

Yeongung Ko 1 Yeongsik Kang 2 Chung Yong Sik 1

1전북대학교 탄소소재파이버공학과
2(주)디쏠

Accredited

ABSTRACT

Electrical energy is used for heating and cooling because electric cars do not have engines and cooling water. The downside is that when the heating and cooling system is applied to electric vehicles, about 40 percent of the energy is spent on heating and cooling, which is less efficient in winter. This has increased demand for electric vehicle battery efficiency. In this study, the condensation and dispersion of carbon nanotubes were controlled, and carbon fibers and composite slurry were manufactured without binders to manufacture paper. Manufactured by content showed the highest heat generation characteristic at 143°C with a carbon fiber content ratio of 20wt% and confirmed that the heat temperature rises with increasing pressure. The plane heaters made through this study can be applied to a variety of products other than electric vehicles because they can be simplified by process and high temperature.

Citation status

* References for papers published after 2023 are currently being built.