Evaluation of Shear Bond Strength and Microleakage of Bulk-fill Resin Composites (Bulk-fill 복합레진의 상아질 전단결합강도 및 미세누출)

이한별; Hyunwoo Seo (서현우); LEE JU HYUN (이주현); Howon Park (박호원)

doi:10.5933/JKAPD.2015.42.4.281

Evaluation of Shear Bond Strength and Microleakage of Bulk-fill Resin Composites

Journal of the Korean academy of pediatric dentistry
Abbr : J Korean Acad Pediatr Dent
2015, 42(4), pp.281-290
DOI : 10.5933/JKAPD.2015.42.4.281
Publisher : The Korean Academy Of Pediatric Dentistry
Research Area : Medicine and Pharmacy > Dentistry

이한별 ¹, Hyunwoo Seo ², LEE JU HYUN ², Howon Park ²

¹강릉원주대학교 치과대학 소아치과학교실 및 구강과학연구소
²강릉원주대학교

Accredited

ABSTRACT

The aim of this study was to evaluate shear bond strength (SBS) of bulk-fill resin composites (RCs) to dentin and their micro-leakage. One high-viscosity bulk-fill RC and 2 low-viscosity bulk-fill RCs were compared with 1 conventional RC. 7thgenerationbondingagentswereused. In order to evaluate SBS values, 40 permanent molars were selected and divided into 4 groups. The bulk-fill RCs were applied in 4 mm thickness, whereas the conventional RC was applied in 2 mm thickness. In order to evaluate micro-leakage, class I cavities (5 × 2 × 4 mm) were prepared in 32 permanent molars. The teeth were divided into 4 groups and restored with resin composites in an increment of 4 mm for the bulkfill RC and in 2 horizontal increments of 2 mm for the conventional RC. The mean SBS value of conventional RC showed no statistically significant difference when compared with those of low-viscosity bulk-fill RCs. However, the mean SBS value of high-viscosity bulk-fill RC was significantly lower than that of conventional RC (p < 0.05). There were no statistically significant differences in micro-leakage between the 4 groups. For SBS and micro-leakage, the use of low-viscosity bulk-fill RCs might help clinicians simplify the procedure.

KEYWORDS

Bulk-fill resin composites, Shear bond strength, Micro-leakage, 7thgenerationbondingagent

Citation status

* References for papers published after 2023 are currently being built.

[journal] Kubo S / 2004 / The effect of light-curing modes on the microleakage of cervical resin composite restorations / J Dent 32 : 247~254

[journal] Karthick K / 2011 / Polymerization Shrinkage of Composites - A Review / J Ind Acad Dent Spec 2 : 32~36

[journal] Winkler MM / 1996 / Finite element stress analysis of three filling techniques for class V light-cured composite restorations / J Dent Res 75 : 1477~1483

[journal] Versluis A / 1996 / Does an incremental filling technique reduce polymerization shrinkage stresses? / J Dent Res 75 : 871~878

[journal] Manhart J / 124 / Bulk-fill-composites. Modern application technique of direct composites for posterior teeth / Swiss Dent J 124 : 19~37

[journal] Czasch P / 2013 / In vitro comparison of mechanical properties and degree of cure of bulk fill composites / Clin Oral Investig 17 : 227~235

[journal] Bucuta S / 2014 / Light transmittance and micromechanical properties of bulk fill vs. conventional resin based composites / Clin Oral Investig 18 : 1991~2000

[journal] Moorthy A / 2012 / Cuspal deflection and microleakage in premolar teeth restored with bulk-fill flowable resin-based composite base materials / J Dent 40 : 500~505

[journal] Campos EA / 2014 / Marginal adaptation of class II cavities restored with bulk-fill composites / J Dent 42 : 575~581

[journal] Alrahlah A / 2014 / Post-cure depth of bulk fill dental resin-composites / Dent Mater 30 : 149~154

[journal] El-Damanhoury H / 2014 / Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites / Oper Dent 39 : 374~382

[journal] Leprince JG / 2014 / Physicomechanical characteristics of commercially available bulk-fill composites / J Dent 32 : 247~254

[journal] Scotti N / 2014 / Microleakage at enamel and dentin margins with a bulk fills flowable resin / Eur J Dent 8 : 1~8

[journal] Jang JH / 2015 / Polymerization shrinkage and depth of cure of bulk-fill resin composites and highly filled flowable resin / Oper Dent 40 : 172~180

[journal] Roggendorf MJ / 2011 / Marginal quality of flowable 4-mm base vs. conventionally layered resin composite / J Dent 39 : 643~647

[journal] Van Ende A / 2013 / Bulk-filling of high C-factor posterior cavities: effect on adhesion to cavity-bottom dentin / Dent Mater 29 : 269~277

[journal] Ilie N / 2014 / An in-vitro assessment of the shear bond strength of bulk-fill resin composites to permanent and deciduous teeth / J Dent 42 : 850~855

[journal] Flury S / 2014 / Influence of increment thickness on microhardness and dentin bond strength of bulk fill resin composites / Dent Mater 30 : 1104~1112

[journal] El-Safty S / 2012 / Creep deformation of restorative resin-composites intended for bulk-fill placement / Dent Mater 28 : 928~935

[journal] Goodis HE / 1993 / Storage effects on dentin permeability and shear bond strengths / Dent Mater 9 : 79~84

[journal] 김창윤 / 2007 / Microleakage of composite resin restoration according to the number of thermocycling / Restorative Dentistry and Endodontics / 대한치과보존학회 32(4) : 377~384

[journal] Venhoven BA / 1993 / Polymerization contraction and conversion of lightcuring BisGMA-based methacrylate resins / Biomaterials 14 : 871~875

[journal] Sakaguchi RL / 2004 / Critical configuration analysis of four methods for measuring polymerization shrinkage strain of composites / Dent Mater 20 : 388~396

[journal] Yamazaki PC / 2006 / Microleakage evaluation of a new lowshrinkage composite restorative material / Oper Dent 31 : 670~676

[journal] Eick JD / 1986 / Polymerization shrinkage of posterior composite resins and its possible influence on postoperative sensitivity / Quintessence Int 17 : 103~111

[web] / Technical Manual - SureFil SDR Flow from Dentsply Caulk / http://www.surefilsdrflow.com/sites/default/files/SureFil_Technical_Manual.pdf

[web] / Scientific Compendium Venus BulkFill reported by Heraeus kulzer / http://heraeus-kulzer-us.com/media/webmedia_local/media/pdf_files/scientific_compendiums___from_hkg/Venus_Bulk_Fill_Scientific_Compendium.pdf

[web] / Tetric N-Ceram Bulk Fill - Ivoclar Vivadent Asia / http://asia.ivoclarvivadent.com/zoolu-website/media/document/15761/Tetric+N-Ceram+Bulk+Fill

[journal] Alshali RZ / 2013 / Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals / Dent Mater 29 : e213~e217

[journal] Xu X / 2006 / Shear bond strength with increasing light-guide distance from dentin / J Esthet Restor Dent 18 : 19~27

[web] / A laboratory Evaluation of Bulk-Fill Versus Traditional Multi-Increment-Fill Resin-Based Composites reported by ADA Professional Product Review / http://www.ada.org/~/media/ADA/Publications/PPR/PPR_VOL8_ISS3.ashx

[journal] Leloup G / 2001 / Meta-analytical review of factors involved in dentin adherence / J Dent Res 80 : 1605~1614

[journal] 황순주 / 2006 / Estimation of relation between techniques of dye penetration for microleakage and SEM evaluation for marginal adaptation of the restoration / Restorative Dentistry and Endodontics / 대한치과보존학회 31(5) : 337~343

[journal] Knobloch LA / 2007 / Bond strengths of one-and two-step self-etch adhesive systems / J Prosthet Dent 97 : 216~222

[journal] Margvelashvili M / 2010 / In vitro evaluation of bonding effectiveness to dentin of all-in-one adhesives / J Dent 38 : 106~112

KJCKorea
Journal Central

Journal of the Korean academy of pediatric dentistry 2023 KCI Impact Factor : 0.48

Evaluation of Shear Bond Strength and Microleakage of Bulk-fill Resin Composites

ABSTRACT

KEYWORDS

Citation status

* References for papers published after 2023 are currently being built.

Journal of the Korean academy of pediatric dentistry 2023 KCI Impact Factor : 0.48

Evaluation of Shear Bond Strength and Microleakage of Bulk-fill Resin Composites

ABSTRACT

KEYWORDS

Statistics

Tools

Issue List

Citation status

KCI Citation Counts (4)

REFERENCES (35) * References for papers published after 2023 are currently being built.

Search PDF

Citation

* References for papers published after 2023 are currently being built.