Shear Bond Strength Comparison of Different Adhesive Systems to Calcium Silicate-based Materials

Hyunok Shin (신현옥); Kim Mi Sun (김미선); NAM OK HYUNG (남옥형); Lee Hyo-Seol (이효설); Chul Choi Sung (최성철); KIM， KWANG CHUL (김광철)

doi:10.5933/JKAPD.2018.45.4.445

Shear Bond Strength Comparison of Different Adhesive Systems to Calcium Silicate-based Materials

Journal of the Korean academy of pediatric dentistry
Abbr : J Korean Acad Pediatr Dent
2018, 45(4), pp.445-454
DOI : 10.5933/JKAPD.2018.45.4.445
Publisher : The Korean Academy Of Pediatric Dentistry
Research Area : Medicine and Pharmacy > Dentistry
Received : March 20, 2018
Accepted : May 4, 2018
Published : November 30, 2018

Hyunok Shin ¹, Kim Mi Sun ², NAM OK HYUNG ³, Lee Hyo-Seol ⁴, Chul Choi Sung ⁴, KIM， KWANG CHUL ⁴

¹강동경희대학교병원 치과병원 소아치과
²강동경희대학교병원
³경희의료원
⁴경희대학교

Accredited

ABSTRACT

The aim of this study was to measure the shear bond strength (SBS) of different adhesive systems to calcium silicatebased materials (Biodentine and RetroMTA). Eighty cylindrical acrylic blocks, with a hole (5.0 mm diameter, 2.0 mm height) in each, were prepared. The holes were filled with Biodentine (BD) and RetroMTA (RMTA), and the specimens were divided into 2 groups. Each group was classified into 4 subgroups: ClearfilTM SE (CSE) ; AQ bond (AQ) ; All bond universal Self-etch (ABU-SE) ; and All bond universal Total-etch (ABU-TE). After the application of different adhesive systems, composite resin (Z350) was applied over BD and RMTA. The SBS was measured using a universal testing machine, and the data were compared using the Kruskal-Wallis test and the Mann-Whitney test. The highest and lowest values of SBS were observed for BD-ABU-SE and RMTA-AQ, respectively. No significant differences were found in the SBS between ABU-TE and ABU-SE and between ABU-TE and CSE to BD and RMTA. According to the data, BD showed a higher SBS than did RMTA when BD and RMTA are compared in the same adhesive agents. Further, among all groups, composite resin with ABU-SE showed better bond strength to BD and RMTA.

KEYWORDS

Calcium silicate-based materials, Biodentine, RetroMTA, Dentin adhesive, Self-etch adhesive system, Shear bond strength, Failure modes

Citation status

* References for papers published after 2023 are currently being built.

[journal] Gulati S / 2014 / Comparison of shear bond strength of resin-modified glass ionomer to conditioned and unconditioned mineral trioxide aggregate surface: An in vitro study / J Conserv Dent 17 : 440~443

[journal] Cantekin K / 2015 / Bond strength of different restorative materials to light-curable mineral trioxide aggregate / J Clin Pediatr Dent 39 : 143~148

[journal] Torabinejad M / 1999 / Clinical applications of mineral trioxide aggregate / J Endod 25 : 197~205

[journal] Antunes Bortoluzzi E / 2006 / The use of a setting accelerator and its effect on pH and calcium ion release of mineral trioxide aggregate and white Portland cement / J Endod 32 : 1194~1197

[journal] Boutsioukis C / 2008 / Ex vivo study of the efficiency of two techniques for the removal of mineral trioxide aggregate used as a root canal filling material / J Endod 34 : 1239~1242

[journal] About I / 2016 / Biodentine: from biochemical and bioactive properties to clinical applications / G Ital Endod 30 : 81~88

[journal] Nowicka A / 2013 / Response of human dental pulp capped with biodentine and mineral trioxide aggregate / J Endod 39 : 743~747

[journal] Cantekin K / 2014 / Evaluation of shear bond strength of two resin-based composites and glass ionomer cement to pure tricalcium silicate-based cement (Biodentine®) / J Appl Oral Sci 22 : 302~306

[journal] Kang CM / 2017 / A randomized controlled trial of various MTA materials for partial pulpotomy in permanent teeth / J Dent 60 : 8~13

[journal] Van Meerbeek B / 2003 / Buonocore memorial lecture. Adhesion to enamel and dentin:current status and future challenges / Oper Dent 28 : 215~235

[journal] 김용일 / 2012 / Microleakage and Microtensile Bond Strength Evaluation of the Various Generations of Dentin Bonding Agents / 대한치과재료학회지 / 대한치과재료학회 39(2) : 119~128

[journal] Subramaniam P / 2009 / Mineral trioxide aggregate as pulp capping agent for primary teeth pulpotomy : 2 year follow up study / J Clin Pediatr Dent 33 : 311~314

[journal] Altunsoy M / 2015 / Shear bond strength of a self-adhering flowable composite and a flowable base composite to mineral trioxide aggregate, calcium-enriched mixture cement, and Biodentine / J Endod 41 : 1691~1695

[journal] Atabek D / 2012 / Bond strength of adhesive systems to mineral trioxide aggregate with different time intervals / J Endod 38 : 1288~1292

[journal] Tunç ES / 2008 / The evaluation of bond strength of a composite and a compomer to white mineral trioxide aggregate with two different bonding systems / J Endod 34 : 603~605

[journal] Davidson CL / 1984 / The competition between the composite-dentin bond strength and the polymerization contraction stress / J Dent Res 63 : 1396~1399

[journal] Deepa VL / 2016 / Shear bond strength evaluation of resin composite bonded to three different liners : TheraCal LC, Biodentine, and resin-modified glass ionomer cement using universal adhesive: An in vitro study / J Conserv Dent 19 : 166~170

[journal] Ha WN / 2015 / D90: the strongest contributor to setting time in mineral trioxide aggregate and Portland cement / J Endod 41 : 1146~1150

[journal] Karadas M / 2016 / Evaluation of the bond strength of different adhesive agents to a resinmodified calcium silicate material (TheraCal LC) / Scanning 38 : 403~411

[journal] Shin JH / 2014 / Effect of mineral trioxide aggregate surface treatments on morphology and bond strength to composite resin / J Endod 40 : 1210~1216

[journal] Yoshida Y / 2004 / Comparative study on adhesive performance of functional monomers / J Dent Res 83 : 454~458

[journal] Gandolfi MG / 2011 / Development of the foremost light-curable calcium-silicate MTA cement as root-end in oral surgery. Chemical–physical properties, bioactivity and biological behavior / Dent Mater 27 : 134~157

[journal] Jang JH / 2016 / Comparative study of the dentin bond strength of a new universal adhesive / Dent Mater J 35 : 606~612

[journal] Bayrak S / 2009 / Shear bond strengths of different adhesive systems to white mineral trioxide aggregate / Dent Mater J 28 : 62~67

[journal] Kayahan MB / 2009 / Effect of acid-etching procedure on selected physical properties of mineral trioxide aggregate / Int Endod J 42 : 1004~1014

[journal] Hashem DF / 2014 / The physical characteristics of resin composite–calcium silicate interface as part of a layered/laminate adhesive restoration / Dent Mater 30 : 343~349

[journal] Hanabusa M / 2012 / Bonding effectiveness of a new ‘multi-mode’ adhesive to enamel and dentine / J Dent 40 : 475~484

[journal] Marchesi G / 2014 / Adhesive performance of a multi-mode adhesive system: 1-year in vitro study / J Dent 42 : 603~612

[journal] Ajami AA / 2013 / Comparison of shear bond strength of resin-modified glass ionomer and composite resin to three pulp capping agents / J Dent Res Dent Clin Dent Prospects 7 : 164~168

KJCKorea
Journal Central

Journal of the Korean academy of pediatric dentistry 2023 KCI Impact Factor : 0.48

Shear Bond Strength Comparison of Different Adhesive Systems to Calcium Silicate-based Materials

ABSTRACT

KEYWORDS

Citation status

* References for papers published after 2023 are currently being built.

Journal of the Korean academy of pediatric dentistry 2023 KCI Impact Factor : 0.48

Shear Bond Strength Comparison of Different Adhesive Systems to Calcium Silicate-based Materials

ABSTRACT

KEYWORDS

Statistics

Tools

Issue List

Citation status

KCI Citation Counts (1)

REFERENCES (29) * References for papers published after 2023 are currently being built.

Search PDF

Citation

* References for papers published after 2023 are currently being built.