Color Stability of Bulk-Fill Resin Composites after Immersion in Different Media (다양한 용액에 따른 Bulk-fill 복합레진의 색조안정성 평가)

Sungkyoon Kang (강성균); Jihyun Song (송지현)

doi:10.5933/JKAPD.2019.46.4.353

Color Stability of Bulk-Fill Resin Composites after Immersion in Different Media

Journal of the Korean academy of pediatric dentistry
Abbr : J Korean Acad Pediatr Dent
2019, 46(4), pp.353-361
DOI : 10.5933/JKAPD.2019.46.4.353
Publisher : The Korean Academy Of Pediatric Dentistry
Research Area : Medicine and Pharmacy > Dentistry
Received : July 12, 2019
Accepted : August 19, 2019
Published : November 27, 2019

Sungkyoon Kang ¹, Jihyun Song ²

¹원광대학교 치과대학 소아치과학교실
²원광대학교

Accredited

ABSTRACT

The aim of this study was to evaluate the color stability of bulk-fill and conventional resin composites with respect to different storage media and thickness of composites. Filtek™ Z250 and Filtek™ Z350XT were evaluated as conventional resin composites. Filtek™ Bulk-fill Posterior Restorative and Tetric® N-Ceram Bulk Fill were evaluated as bulk-fill resin composites. CIE L*a*b* values of baseline were measured after 24 hours of storage in distilled water, and each resin composite group was divided into three subgroups and stored in distilled water, red wine, and coffee media respectively. Again after 1, 7 and 28 days of immersion, color changes (ΔE*) were calculated using the CIE L*a*b* values. The greatest ΔE* was observed in red wine for all resin composites, and the mean color changes were ranked in the increasing order of distilled water, coffee, red wine. Filtek™ Z350XT exhibited the greatest color change in all media, followed by Filtek™ Bulk-fill Posterior Restorative. Filtek™ Z250 and Tetric® N-Ceram Bulk Fill followed with similar mean color change values. According to the 2 different thicknesses of 2 mm and 4 mm of bulk-fill resin composites, there was no thickness-related difference on color changes.

KEYWORDS

Color stability, Bulk-fill resin composites, Restorative materials

Citation status

* References for papers published after 2023 are currently being built.

[journal] Ilie N / 2013 / Bulk-fill resin-based composites : an in vitro assessment of their mechanical performance / Oper Dent 38 : 618~625

[journal] Kalliecharan D / 2016 / Shrinkage stress kinetics of Bulk Fill resin-based composites at tooth temperature and long time / Dent Mater 32 : 1322~1331

[journal] Czasch P / 2013 / In vitro comparison of mechanical properties and degree of cure of bulk fill composites / Clin Oral Investig 17 : 227~235

[journal] Al-Ahdal K / 2015 / Polymerization kinetics and impact of post polymerization on the degree of conversion of bulk-fill resin-composite at clinically relevant depth / Dent Mater 31 : 1207~1213

[journal] Barutcigil Ç / 2012 / Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites / J Dent 40 : 57~63

[journal] Deligeorgi V / 2001 / An overview of reasons for the placement and replacement of restorations / Prim Dent Care 8 : 5~11

[journal] Barutcigil Ç / 2018 / Color of bulk-fill composite resin restorative materials / J Esthet Restor Dent 30 : 3~8

[journal] Shamszadeh S / 2016 / Color stability of the bulk-fill composite resins with different thickness in response to coffee/water immersion / Int J Dent 2016 : 7186140~

[journal] 석유정 / 2016 / Comparison of Mechanical Properties between Bulk-fill and Conventional Composite Resin / 대한소아치과학회지 / 대한소아치과학회 43(4) : 427~434

[journal] 윤종현 / 2015 / Color evaluation of low viscosity bulk-fill resin with composite resin capping layer / 구강회복응용과학지 / 대한턱관절교합학회 31(4) : 294~300

[journal] 손유진 / 2010 / Color stability of new silorane-based composite resin: An in vitro spectrophotometric study / 대한소아치과학회지 / 대한소아치과학회 37(1) : 73~81

[journal] 김은하 / 2015 / Effect of resin thickness on the microhardness and optical properties of bulk-fill resin composites / Restorative Dentistry and Endodontics / 대한치과보존학회 40(2) : 128~135

[journal] Reem AA / 2015 / Optical and surface properties of different bulkfill resin composites after storage in different media / J Am Sci 11 : 249~254

[journal] Tanthanuch S / 2018 / Surface changes of various bulk-fill resin-based composites after exposure to different food-simulating liquid and beverages / J Esthet Restor Dent 30 : 126~135

[journal] Uzay Koc-Vural / 2017 / Color stability of bulk-fill and incremental-fill resin-based composites polished with aluminum-oxide impregnated disks / Restorative Dentistry and Endodontics / 대한치과보존학회 42(2) : 118~124

[journal] Yap AU / 1999 / Human-eye versus computerized color matching / Oper Dent 24 : 358~363

[journal] Ertaş E / 2006 / Color stability of resin composites after immersion in different drinks / Dent Mater J 25 : 371~376

[journal] Ugur E / 2018 / Color stability of bulkfill composites immersed in different drinks / Color Res Appl 43 : 1~9

[journal] Um CM / 1991 / Staining of resin-based veneering materials with coffee and tea / Quintessence Int 22 : 377~386

[journal] Muhammet K / 2017 / Evaluation of color stability and surface roughness of bulk-fill resin composites and nanocomposites / Meandros Med Dent J 18 : 199~205

[journal] Villalta P / 2006 / Effects of staining and bleaching on color change of dental composite resins / J Prosthet Dent 95 : 137~142

[journal] Neslihan Tekçe / 2015 / The effect of different drinks on the color stability of different restorative materials after one month / Restorative Dentistry and Endodontics / 대한치과보존학회 40(4) : 255~261

[journal] Kalachandra S / 1987 / Water sorption of polymethacrylate networks : bis-GMA/TEGDM copolymers / J Biomed Mater Res 21 : 329~338

[journal] Gajewski VE / 2012 / Monomers used in resin composites : degree of conversion, mechanical properties and water sorption/solubility / Braz Dent J 23 : 508~514

[journal] Dietschi D / 1994 / Comparison of the color stability of ten new-generation composites : an in vitro study / Dent Mater 10 : 353~362

[journal] Collares FM / 2010 / Ytterbium trifluoride as a radiopaque agent for dental cements / Int Endod J 43 : 792~797

[journal] Manojlovic D / 2016 / Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites / Dent Mater 32 : 183~191

[journal] Arikawa H / 2009 / Effect of various visible light photoinitiators on the polymerization and color of light-activated resins / Dent Mater J 28 : 454~460

[journal] Albuquerque PP / 2013 / Color stability, conversion, water sorption and solubility of dental composites formulated with different photoinitiator systems / J Dent 3 : 67~72

[journal] Ilie N / 2013 / Influence of various irradiation processes on the mechanical properties and polymerisation kinetics of bulk-fill resin based composites / J Dent 41 : 695~702

[journal] Yap AU / 2005 / Curing efficacy of a new generation high-power LED lamp / Oper Dent 30 : 758~763

[journal] Benetti AR / 2015 / Bulkfill resin composites : polymerization contraction, depth of cure, and gap formation / Oper Dent 40 : 190~200

KJCKorea
Journal Central

Journal of the Korean academy of pediatric dentistry 2023 KCI Impact Factor : 0.48

Color Stability of Bulk-Fill Resin Composites after Immersion in Different Media

ABSTRACT

KEYWORDS

Citation status

* References for papers published after 2023 are currently being built.

Journal of the Korean academy of pediatric dentistry 2023 KCI Impact Factor : 0.48

Color Stability of Bulk-Fill Resin Composites after Immersion in Different Media

ABSTRACT

KEYWORDS

Statistics

Tools

Issue List

Citation status

KCI Citation Counts (1)

REFERENCES (32) * References for papers published after 2023 are currently being built.

Search PDF

Citation

* References for papers published after 2023 are currently being built.