Korean Journal of Occupational Therapy 2023 KCI Impact Factor : 0.81
-
pISSN : 1226-0134 / eISSN : 2671-4450
- https://journal.kci.go.kr/kjot
KJCKorea
Journal Central
A Systematic Review of Manufacturing Method for Splint Using 3D Printing Technology
- Korean Journal of Occupational Therapy
- Abbr : Korean J of Occup Ther
- 2018, 26(2), pp.1-15
- DOI : 10.14519/jksot.2018.26.2.01
- Publisher : Korean Society Of Occupational Therapy
- Research Area : Medicine and Pharmacy > Working Therapeutics
- Received : January 30, 2018
- Accepted : March 4, 2018
- Published : June 30, 2018
Choi, Won-Seuk 1, Jong-bae Kim 2
1연세대학교 작업치료학과
2연세대학교
Accredited
ABSTRACT
Objective: The purpose of this study is to investigate the application of 3D printing technology to the upper limb production through a systematic review and to summarize and analyze the necessary information to provide basic basis for future clinical application in the field of occupational therapy.
Methods: For the last five years from 2013 to 2017, the articles were searched using electronic databases RISS, KISS, Scopus, PubMed and Google Scholar. As a search keyword, "3D Printing AND Orthosis OR Splint OR Brace" was used. The searched article were classified through the second classification and finally 16 article were selected and analyzedResults: About 80% of the article to be analyzed were single-target experimental studies and case studies with lower quality. As a result of analyzing the producers major, it was divided into four major categories. Among them, the engineering department was the most, followed by the health department. Six types of upper splint were manufactured. Cock-up splint and finger splint were made the most. ABS was the most commonly used plastic material. There are four manufacturing methods used in the analyzed article, and the most used manufacturing method is the FDM method. As a method of measurement, 3D scanners were the most popular method to manufactured upper splint.
Conclusion: In this study, we learned how to make upper splint using 3D printing technology. Based on this, I would like to provide basic data for applying 3D printing technology to manufactured the upper splint which is one of the occupational therapist's job scope. I would like to present a direction for future research. Based on the results of this study, it is expected that the development and research of upper splint applying 3D printing technology in occupational therapy field will be more active.
Statistics
-
689 Viewed
-
4 Downloaded
Tools
Issue List
Citation status
* References for papers published after 2023 are currently being built.
[book]
김장환
/ 2012
/ 의지 보조기학
/ 탑메디오피아
[journal]
박세환
/ 2014
/ 3D 프린팅 산업동향 분석을 통한 연구개발정책 연구
/ 과학기술정책
24(3/4)
: 93~104
[book]
정진우
/ 2008
/ 보조기 . 의지학
/ 대학서림
[book]
홍재란
/ 2014
/ 스플린트
/ 정담미디어
[journal]
Abby
/ 2015
/ Comparing additive manufacturing technologies for customised wrist splints
/ Rapid Prototyping Journal
21(3)
: 230~243
[journal]
Adrienne, C.
/ 2011
/ Inpatient occupational therapists hand-splinting practice for clients with stroke: A cross-sectional survey from Irelan
/ Journal of Neurosciences in Rural Practice
2
: 141~149
[journal]
Ahn, D. G.
/ 2005
/ Principle of rapid prototyping and its trends
/ Journal of the Korean Society for Precision Engineering
22(10)
: 7~16
[journal]
Arbesman, M.
/ 2008
/ Using AOTA's Critically Appraised Topic (CAT) and Critically Appraised Paper(CAP) series to link evidence to practice
/ OT Practice
13(5)
: 18~22
[journal]
Baronio, G.
/ 2016
/ A critical analysis of a hand orthosis reverse engineering and 3D printing process
/ Applied Bionics and Biomechanics
2016
: 1~7
[journal]
Cho, S. W.
/ 2015
/ Application of 3D printing into the surgical field
/ Korean Society of Endoscopic and Laparoscopic Surgeons
2015
: 185~186
[journal]
최봉근
/ 2015
/
3D printing-based Fabrication of Orthotic Devices Using 3D Computer-Aided Design and Rapid Prototyping
/ 재활복지공학회논문지
/ 한국재활복지공학회
9(2)
: 145~151
[book]
Cooper, R. A.
/ 2006
/ An introduction to rehabilitation engineering
/ CRC Press
[journal]
Gerr, F.
/ 2004
/ Epidemiology of musculoskeletal disorders a mong computer users: Lesson learned from the role of posture and keyboard use
/ Journal of Electromyography and Kinesiology
14(1)
: 25~31
[journal]
허서윤
/ 2015
/
A study on the Case of Developing Manufacturing Techniques for Orthosisusing 3D Printing Technology : Focusing on Comparative Study with using the Splint Pan
/ 장애와 고용
/ 한국장애인고용공단 고용개발원
25(1)
: 79~104
[journal]
Hockaday, L. A.
/ 2012
/ Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds
/ Biofabrication
4(3)
: 1~12
[journal]
홍정식
/ 2008
/
A Study on a Long-term Demand Forecasting and Characterization of Diffusion Process for Medical Equipments based on Diffusion Model
/ 보건행정학회지
/ 한국보건행정학회
18(4)
: 85~110
[book]
Jacobs, M. A.
/ 2013
/ Orthotic intervention for the hand and extremity: Splinting principles and process
/ Lippincott Williams & Willkins
[journal]
Jakab, K. R.
/ 2006
/ Three-dimensional tissue constructs builtby bioprinting
/ Biorheology
43
: 509~513
[journal]
정광호
/ 2014
/
The product design in the study on the application of 3D printing
/ 상품문화디자인학연구
/ 한국상품문화디자인학회
(39)
: 1~11
[journal]
강용구
/ 2017
/
The Influence of Experiment Variables on 3D Printing using ABS Resin
/ 한국기계가공학회지
/ 한국기계가공학회
16(2)
: 94~101
[journal]
김진
/ 2014
/
3D Printing Industry: Technology, Market and Opportunity
/ 경영컨설팅연구
/ 한국경영컨설팅학회
14(1)
: 265~285
[journal]
김헌
/ 2015
/
Case study: Hybrid model for the customized wrist orthosis using 3D printing
/ Journal of Mechanical Science and Technology
/ 대한기계학회
29(12)
: 5151~5156
[journal]
김현주
/ 2016
/
A Study on the Design Characteristics of 3D Printing - Focused on the Analysis of Product Cases in Fashion Related Areas -
/ 조형디자인연구
/ 사단법인 한국조형디자인협회
19(2)
: 133~152
[journal]
김정현
/ 2015
/
Modeling Process Development for Customized Woman Midsole Design based-on 3D Printing Technology - Focused on a women in her twenties with 235-240mm foot size-
/ 한국디자인포럼
/ 한국디자인트렌드학회
(46)
: 267~277
[journal]
김규상
/ 2010
/
Status and Characteristics of Occurrence of Work‐related Musculoskeletal Disorders
/ 대한인간공학회지
/ 대한인간공학회
29(4)
: 405~422
[journal]
Kim, M. H.
/ 2001
/ Development of three dimensional scanner for anthropometric measurement
/ Journal of the Engonomics Society of Korea
20(3)
: 77~88
[journal]
김민관
/ 2016
/
Market Prediction Methodology for a Medical 3D Printing Business : Focusing on Dentistry
/ Journal of Information Technology Applications & Management
/ 한국데이터전략학회
23(2)
: 263~277
[thesis]
Kim, S. J.
/ 2016
/ Effectiveness and satisfaction of 3D printed wrist brace for patients with wrist pain caused by overus
/ Sungkyunkwan University
[confproc]
Ko, S. J.
/ 2015
/ A study on cutting test and analysis of stiffness to various materials for developing complex 3D printing platform performing laminating and cutting
/ Paper presented at the 70th annual conference of the Korean society of mechanical engineers
[journal]
구다솜
/ 2017
/
The Development of a Wrist Brace using 3D Scanner and 3D Printer
/ 한국의류산업학회지
/ 한국의류산업학회
19(3)
: 312~319
[journal]
Kwak, K. H.
/ 2013
/ Global 3D printer industry technology trends analysis
/ Korea Institute and Materials Technology Policy Mechanical Engineering
53(10)
: 58~64
[journal]
Lannin, N. A.
/ 2003
/ Is hand splinting effective for adults following stroke? A systematic review and methodological critique of published research
/ Clinical Rehabilitation
17
: 807~816
[confproc]
Lee, H. B.
/ 2015
/ Fabrication of adaptive structure for rehabilitation using 3D scanning of human body shape
/ Paper presented at the annual conference of the Korean society of manufacturing technology engineers
[confproc]
Mauren, A. d. S.
/ 2017
/ Proposal of custom made wrist orthoses based on 3D modelling and 3D printing
/ Paper presented at the 39th annual international conference of the IEEE engineering in medicine and biology society
[journal]
Miguel, F. V.
/ 2017
/ Low cost digital fabrication approach for thumb orthoses
/ Rapid Prototyping Journal
23
: 1020~1031
[journal]
Palousek, D.
/ 2014
/ Pilot study of the wrist orthosis design process
/ Rapid Prototyping Journal
20
: 127~132
[confproc]
Park, C. S.
/ 2016
/ Design and manufacturing of the hand orthosis using 3D printing
/ Paper presented at the annual conference of the Korean society of manufacturing technology engineers
[confproc]
Park, C. S.
/ 2016
/ Topology optimization and 3D printing manufacturing for the personalized hand orthosis
/ Paper presented at the annual conference of the Korean society of manufacturing technology engineers
[journal]
박석희
/ 2014
/
Current Status of Biomedical Applications using 3D Printing Technology
/ 한국정밀공학회지
/ 한국정밀공학회
31(12)
: 1067~1076
[journal]
Park, S. H.
/ 2015
/ 3D printing technology for biomedical applications
/ KIC News
18(1)
: 67~78
[journal]
Rahmati, S.
/ 2012
/ An improved methodology for design of custom-made hip prostheses to be fabricated using additive manufacturing technologies
/ Rapid Prototyping Journal
18
: 389~400
[journal]
성열훈
/ 2015
/
3-Dimensional Printing for Mesh Types of Short Arm Cast by Using Computed Tomography
/ 한국콘텐츠학회 논문지
/ 한국콘텐츠학회
15(1)
: 308~315
[journal]
신수정
/ 2017
/
A case study on the application of new hand splint using 3D printing
/ 융합정보논문지
/ 중소기업융합학회
7(2)
: 25~29
[journal]
Shin, Y. M.
/ 2015
/ Types and applications of 3D printers
/ Polymer Science and Technology
26
: 404~409
[report]
Wohlers
/ 2016
/ Wohlers Report 2016
/ Wohler's Associates Inc
[journal]
Wong, J. Y.
/ 2015
/ On-site 3D printing of functional custom mallet splints for mars analogue crewmembers
/ Aerospace Medicine and Human Performance
86
: 911~914
[journal]
윤상희
/ 2013
/
A study on Manufacturing Personal Ornaments Using Personal Portable 3D printer - Focused on Method to Use Ottchil(Korean Lacquer) -
/ 기초조형학연구
/ 한국기초조형학회
14(5)
: 297~308