@article{ART001118061},
author={허 유 and 안성기 and JANG Seung Ho},
title={A Study on the Press Belt Motion in the Fusing Press M/C},
journal={Textile Coloration and Finishing },
issn={1229-0033},
year={2005},
volume={17},
number={5},
pages={53-60}
TY - JOUR
AU - 허 유
AU - 안성기
AU - JANG Seung Ho
TI - A Study on the Press Belt Motion in the Fusing Press M/C
JO - Textile Coloration and Finishing
PY - 2005
VL - 17
IS - 5
PB - The Korean Society Of Dyers And Finishers
SP - 53
EP - 60
SN - 1229-0033
AB - Fusing press m/c is used for heating and pressing the specimens that are fed into between the two moving belts. Therefore the belt movement, belt temperature, and the pressure between belts must be kept constant. Especially, the belts should move in a limited operation range. When the belts run far out of the operation point, the machine has to be stopped, which results in a product defect because the fusing conditions, e.g., temperature and pressure, change during the transient process time period. It is important to avoid the belt stopping by maintaining the belt movement in a limited range. This study reports about the movement of the endless fusing belt in a long-span roller fusing m/c. The belt position changes as the 1st-order system does; if the roller axes are slanting each other with a certain angle, the belt running around the two rolls shows a dynamic behavior with the time that deviates fastly at the beginning from the initial condion and slows down. Then it reaches at a final position. The skewer the axes, the greater the position change. The inital change rate of the belt becomes large as the skewness of the axes between the two rollers increases.
KW - fusing press m/c;belt movement;roller axes;slanting angle;1st-order system Fusing press
DO -
UR -
ER -
허 유, 안성기 and JANG Seung Ho. (2005). A Study on the Press Belt Motion in the Fusing Press M/C. Textile Coloration and Finishing , 17(5), 53-60.
허 유, 안성기 and JANG Seung Ho. 2005, "A Study on the Press Belt Motion in the Fusing Press M/C", Textile Coloration and Finishing , vol.17, no.5 pp.53-60.
허 유, 안성기, JANG Seung Ho "A Study on the Press Belt Motion in the Fusing Press M/C" Textile Coloration and Finishing 17.5 pp.53-60 (2005) : 53.
허 유, 안성기, JANG Seung Ho. A Study on the Press Belt Motion in the Fusing Press M/C. 2005; 17(5), 53-60.
허 유, 안성기 and JANG Seung Ho. "A Study on the Press Belt Motion in the Fusing Press M/C" Textile Coloration and Finishing 17, no.5 (2005) : 53-60.
허 유; 안성기; JANG Seung Ho. A Study on the Press Belt Motion in the Fusing Press M/C. Textile Coloration and Finishing , 17(5), 53-60.
허 유; 안성기; JANG Seung Ho. A Study on the Press Belt Motion in the Fusing Press M/C. Textile Coloration and Finishing . 2005; 17(5) 53-60.
허 유, 안성기, JANG Seung Ho. A Study on the Press Belt Motion in the Fusing Press M/C. 2005; 17(5), 53-60.
허 유, 안성기 and JANG Seung Ho. "A Study on the Press Belt Motion in the Fusing Press M/C" Textile Coloration and Finishing 17, no.5 (2005) : 53-60.
