본문 바로가기
  • Home

Optimal Process Condition and Blowing of Thermoplastic Polyester Film using Thermally Expandable Microcapsule

  • Textile Coloration and Finishing
  • Abbr : Text. Color. and Finish.
  • 2019, 31(3), pp.187-194
  • DOI : 10.5764/TCF.2019.31.3.187
  • Publisher : The Korean Society Of Dyers And Finishers
  • Research Area : Engineering > Fiber Engineering > Dyeing Engineering
  • Received : September 5, 2019
  • Accepted : September 15, 2019
  • Published : September 27, 2019

A Ram Bak 1 Jung Hyun Park 2 Lee Seung Geol 1

1부산대학교 유기소재시스템공학과
2부산대학교 의류학과

Accredited

ABSTRACT

Blowing film was prepared using polyester elastomer with thermally expandable microcapsule to investigate the optimum blowing properties and the film making process. Physical properties including specific gravity, blowing efficiency, foaming shape, tensile strength and elongation of polyester film were tested by varying the process condition of temperature and revolution per minutes of the extruder. The lowest specific gravity of 0.709 can be achieved with excellent foaming cells at 210℃ and 50 RPM conditions. The highest tensile strength and elongation was shown at 210℃, 100 RPM and 230℃, 25 RPM conditions. However, most of the prepared polyester films showed over 1kgf/mm2 of tensile strength which is reasonable value to use in film applications.

Citation status

* References for papers published after 2023 are currently being built.