Carbon Letters 2023 KCI Impact Factor : 1.35 KCI-WoS Impact Factor : 6.04
-
pISSN : 1976-4251 / eISSN : 2233-4998
- https://journal.kci.go.kr/carbon
KJCKorea
Journal Central
Polymer matrices for carbon fiber-reinforced polymer composites
- Carbon Letters
- Abbr : Carbon Lett.
- 2013, 14(2), pp.76-88
- Publisher : Korean Carbon Society
- Research Area : Natural Science > Natural Science General > Other Natural Sciences General
Fan-Long Jin 1, 이슬이 2, PARK SOOJIN 2
1Jilin Institute of Chemical Technology
2인하대학교
Accredited
ABSTRACT
Carbon fibers (CFs) have high service temperature, strength, and stiffness, and low weight. They are widely used as reinforcing materials in advanced polymer composites. The role of the polymer matrix in the composites is to provide bulk to the composite laminate and transfer load between the fibers. The interface between the CF and the resin matrix plays a critical role in controlling the overall properties of the composites. This paper aims to review the synthesis, properties, and applications of polymer matrices, such as thermosetting and thermoplastic resins.
Statistics
-
432 Viewed
-
2 Downloaded
Tools
Issue List
Citation status
This is the result of checking the information with the same ISSN, publication year, volume, and start page between the WoS and the KCI journals. (as of 2023-01-02)
Total Citation Counts(KCI+WOS) (34) This is the number of times that the duplicate count has been removed by comparing the citation list of WoS and KCI.
* References for papers published after 2023 are currently being built.
[journal]
Barton JM
/ 1996
/ Mechanical properties of tough, high temperature carbon fibre composites from novel functionalized aryl cyanate ester polymers
/ Polymer
37
: 4519~
[journal]
Marieta C
/ 2002
/ Characterization of interfacial behaviour in carbon-fibre/cyanate composites
/ Compos Sci Technol
62
: 299~
[journal]
Ren P
/ 2006
/ Influence of epoxy sizing of carbon-fiber on the properties of carbon fiber/cyanate ester composites
/ Polym Compos
27
: 591~
[journal]
Chung K
/ 2001
/ Evaluation of thermal degradation on carbon fiber/cyanate ester composites
/ Polym Degrad Stab
71
: 425~
[journal]
Thunga M
/ 2011
/ Adhesive repair of bismaleimide/ carbon fiber composites with bisphenol E cyanate ester
/ Compos Sci Technol
71
: 239~
[journal]
Mater Sci Eng
/ 2011
/ Thermal and mechanical interfacial properties of epoxy composites based on functionalized carbon nanotubes
/ Mater Sci Eng A
528
: 8517~
[journal]
Lin Zhu
/ 2012
/
Thermal Stability and Fracture Toughness of Epoxy Resins Modified with Epoxidized Castor Oil and Al2O3 Nanoparticles
/ Bulletin of the Korean Chemical Society
/ 대한화학회
33(8)
: 2513~2516
[journal]
Park SJ
/ 2000
/ Effect of fiber-polymer interactions on fracture toughness behavior of carbon fiber-reinforced epoxy matrix composites
/ J Colloid Interf Sci
228
: 287~
[journal]
Yoo MJ
/ 2010
/ Investigation of curing kinetics of various cycloaliphatic epoxy resins using dynamic thermal analysis
/ Eur Polym J
46
: 1158~
[journal]
Park SJ
/ 2000
/ Cure behavior of diglycidylether of bisphenol A/trimethylolpropane triglycidylether epoxy blends initiated by thermal latent catalyst
/ J Polym Sci B
38
: 2114~
[journal]
Kwak GH
/ 2000
/ Thermal stability and mechanical behavior of cycloaliphatic-DGEBA epoxy blend system initiated by cationic latent catalyst
/ J Appl Polym Sci
78
: 290~
[journal]
Park SJ
/ 2004
/ Thermal and mechanical properties of tetrafunctional epoxy resin toughened with epoxidized soybean oil
/ Mater Sci Eng A
374
: 109~
[journal]
Lee MC
/ 1996
/ Synthesis of tetrafunctional epoxy resins and their modification with polydimethylsiloxane for electronic application
/ J Appl Polym Sci
62
: 217~
[journal]
Chen W
/ 2007
/ Effect of new epoxy matrix for T800 carbon fiber/epoxy filament wound composites
/ Compos Sci Technol
67
: 2261~
[journal]
Miloshev S
/ 1991
/ Synthesis of novolac resins: 2. Influence of the reaction medium on the properties of the novolac oligomers
/ Polymer
32
: 3067~
[journal]
Park SJ
/ 2000
/ Isothermal cure kinetics of epoxy/ phenol-novolac resin blend system initiated by cationic latent thermal catalyst
/ J Polym Sci A
38
: 2945~
[journal]
Guo B
/ 2003
/ Hygrothermal stability of dicyanatenovolac epoxy resin blends
/ Polym Degrad Stab
79
: 521~
[journal]
Hong-Jun Xu
/ 2009
/
Synthesis of a Novel Phosphorus-containing Flame Retardant for Epoxy Resins
/ Bulletin of the Korean Chemical Society
/ 대한화학회
30(11)
: 2643~2646
[journal]
Park SJ
/ 2004
/ Thermal stabilities and dynamic mechanical properties of sulfone-containing epoxy resin cured with anhydride
/ Polym Degrad Stab
86
: 515~
[journal]
Park SJ
/ 2004
/ Synthesis and thermal properties of epoxidized vegetable oil
/ Macromol Rapid Commun
25
: 724~
[journal]
Park SJ
/ 2005
/ Cationic polymerization and physicochemical properties of a biobased epoxy resin initiated by thermally latent catalysts
/ Eur Polym J
41
: 231~
[journal]
Park SJ
/ 2005
/ Physicochemical and mechanical interfacial properties of trifluorometryl groups containing epoxy resin cured with amine
/ Mater Sci Eng A
390
: 240~
[journal]
Park SJ
/ 2005
/ Synthesis and characterization of UV-curable acrylic resins containing fluorine groups
/ Polym Int
54
: 705~
[book]
Park SJ
/ 2011
/ Epoxy resins: fluorine systems, In Wiley encyclopedia of composites
/ John Wiley & Sons
[journal]
Choi MH
/ 2000
/ The effect of coupling agent on electrical and mechanical properties of carbon fiber/phenolic resin composites
/ Polymer
41
: 3243~
[journal]
Park SJ
/ 2001
/ Interfacial characteristics and fracture toughness of electrolytically Ni-plated carbon fiber-reinforced phenolic resin matrix composites
/ J Colloid Interf Sci
237
: 91~
[journal]
Carbon
/ 2009
/ CO2 capture capacities of activated carbon fibre-phenolic resin composites
/ Carbon
47
: 2396~
[journal]
Fei J
/ 2010
/ Effect of phenolic resin content on performance of carbon fiber reinforced paper-based friction material
/ Wear
269
: 534~
[journal]
Hsiao KT
/ 2008
/ Investigation on the spring-in phenomenon of carbon nanofiber-glass fiber/polyester composites manufactured with vacuum assisted resin transfer molding
/ Composites A
39
: 834~
[journal]
Cecen V
/ 2006
/ Polyester composites reinforced with noncrimp stitched carbon fabrics: Mechanical characterization of composites and investigation on the interaction between polyester and carbon fiber
/ J Appl Polym Sci
102
: 4554~
[journal]
Monti M
/ 2011
/ Carbon nanofibers for strain and impact damage sensing in glass fiber reinforced composites based on an unsaturated polyester resin
/ Polym Compos
32
: 766~
[journal]
Vilcakova J
/ 2002
/ Electrical conductivity of carbon fibres/polyester resin composites in the percolation threshold region
/ Eur Polym J
38
: 2343~
[journal]
Zhang XR
/ 2009
/ Friction and wear studies of polyimide composites filled with short carbon fibers and graphite and micro SiO2
/ Mater Design
30
: 4414~
[journal]
Samyn P
/ 2009
/ Thermochemical sliding interactions of short carbon fiber polyimide composites at high pv-conditions
/ Mater Chem Phys
115
: 185~
[journal]
Mascia L
/ 1996
/ Carbon fibre composites based on polyimide/silica ceramers: aspects of structure-properties relationship
/ Composites A
27
: 1211~
[journal]
Li J
/ 2008
/ Friction and wear properties of surface-treated carbon fiber-reinforced thermoplastic polyimide composites under oil-lubricated condition
/ Mater Chem Phys
108
: 67~
[journal]
Polymer
/ 1998
/ Fatigue performance of carbon fibre/vinyl ester composites: the effect of two dissimilar polymeric sizing agents
/ Polymer
39
: 3417~
[journal]
Vautard F
/ 2012
/ Properties of thermo-chemically surface treated carbon fibers and of their epoxy and vinyl ester composites
/ Composites A
43
: 1120~
[journal]
Jin FL
/ 2006
/ Surface treatment of montmorillonite on the thermal stabilities of bisphenol-A diglycidyl dimethacrylate nanocomposites
/ Mater Sci Eng A
435-436
: 429~
[journal]
Yamada K
/ 2003
/ Plasmagraft polymerization of a monomer with double bonds onto the surface of carbon fiber and its adhesion to a vinyl ester resin
/ J Appl Polym Sci
90
: 2415~
[journal]
Huang CY
/ 2000
/ The EMI shielding effectiveness of PC/ABS/ nickel-coated-carbon-fibre composites
/ Eur Polym J
36
: 2729~
[journal]
J. Li
/ 2011
/
The carbon fiber surface treatment and addition of PA6 on tensile properties of ABS composites
/ Current Applied Physics
/ 한국물리학회
11(1)
: 50~54
[journal]
Wu SH
/ 2001
/ Mechanical, thermal and morphological properties of glass fiber and carbon fiber reinforced polyamide-6 and polyamide-6/ clay nanocomposites
/ Mater Lett
49
: 327~
[journal]
Botelho EC
/ 2003
/ Mechanical behavior of carbon fiber reinforced polyamide composites
/ Compos Sci Technol
63
: 1843~
[journal]
Feldman AY
/ 2004
/ Transcrystallinity in aramid and carbon fiber reinforced nylon 66: determining the lamellar orientation by synchrotron X-ray micro diffraction
/ Polymer
45
: 7239~
[journal]
Senthilvelan S
/ 2006
/ Damping characteristics of unreinforced, glass and carbon fiber reinforced nylon 6/6 spur gears
/ Polym Test
25
: 56~
[journal]
Montes-Moran MA
/ 2001
/ Effects of plasma oxidation on the surface and interfacial properties of carbon fibres/polycarbonate composites
/ Carbon
39
: 1057~
[journal]
Carneiro OS
/ 1998
/ Production and assessment of polycarbonate composites reinforced with vapour-grown carbon fibres
/ Compos Sci Technol
58
: 401~
[journal]
Park JM
/ 2000
/ Interfacial properties of two-carbon fiber reinforced polycarbonate composites using two-synthesized graft copolymers as coupling agents
/ J Colloid Interf Sci
225
: 384~
[journal]
Choi YK
/ 2006
/ Production and characterization of polycarbonate composite sheets reinforced with vapor grown carbon fiber
/ Composites A
37
: 1944~
[book]
Kurtz SM
/ 2012
/ Chapter 2-Synthesis and processing of PEEK for surgical implants
/ William Andrew Publishing
: 9~
[journal]
Ma CCM
/ 1997
/ Creep behavior of carbon-fiber-reinforced polyetheretherketone (PEEK) [±45]4s laminated composites (I)
/ Composites B
28
: 407~
[journal]
Xie GY
/ 2011
/ Effects of potassium titanate whiskers and carbon fibers on the wear behavior of polyetheretherketone composite under water lubricated condition
/ Compos Sci Technol
71
: 828~
[journal]
Gebhard A
/ 2009
/ Galvanic corrosion of polyacrylnitrile (PAN) and pitch based short carbon fibres in polyetheretherketone (PEEK) composites
/ Corros Sci
51
: 2524~
[journal]
Gebhard A
/ 2010
/ Increased wear of aqueous lubricated short carbon fiber reinforced polyetheretherketone (PEEK/SCF) composites due to galvanic fiber corrosion
/ Wear
268
: 871~
[journal]
Wu GM
/ 2000
/ Processing and properties of solution impregnated carbon fiber reinforced polyethersulfone composites
/ Polym Compos
21
: 223~
[journal]
Hou M
/ 1998
/ Manufacture of a carbon-fabricreinforced polyetherimide (CF/PEI) composite material
/ Compos Sci Technol
58
: 181~
[journal]
Kim KY
/ 2004
/ Interlaminar fracture toughness of CF/PEI composites at elevated temperatures: roles of matrix toughness and fibre/ matrix adhesion
/ Composites A
35
: 477~
[journal]
Xian G
/ 2005
/ Sliding wear of polyetherimide matrix composites: I. Influence of short carbon fibre reinforcement
/ Wear
258
: 776~
[journal]
Fernandez B
/ 2004
/ Influence of polyethersulfone modification of a tetrafunctional epoxy matrix on the fracture behavior of composite laminates based on woven carbon fibers
/ Polym Compos
25
: 480~
[journal]
Peijs AAJM
/ 1993
/ Hybrid composites based on polyethylene and carbon fibers. Part 6: Tensile and fatigue behavior
/ Composites
24
: 19~
[journal]
Hertel D
/ 2008
/ Three-dimensional entrance flow of a low-density polyethylene (LDPE) and a linear low-density polyethylene (LLDPE) into a slit die
/ J Non-Newton Fluid Mech
153
: 82~
[journal]
Spencer MW
/ 2010
/ Morphology and properties of nanocomposites based on HDPE/HDPE-g-MA blends
/ Polymer
51
: 1056~
[journal]
Zhang C
/ 1998
/ Selective location and double percolation of short carbon fiber filled polymer blends: high-density polyethylene/isotactic polypropylene
/ Mater Lett
36
: 186~
[journal]
Jiang Z
/ 2008
/ Study on friction and wear behavior of polyphenylene sulfide composites reinforced by short carbon fibers and sub-micro TiO2 particles
/ Compos Sci Technol
68
: 734~
[journal]
Xu H
/ 2006
/ Tribological behavior of the carbon fiber reinforced polyphenylene sulfide (PPS) composite coating under dry sliding and water lubrication
/ Mater Sci Eng A
416
: 66~
[journal]
Karsli NG
/ 2013
/ Effects of irradiated polypropylene compatibilizer on the properties of short carbon fiber reinforced polypropylene composites
/ Radiat Phys Chem
84
: 74~
[journal]
Dutra RCL
/ 2000
/ Hybrid composites based on polypropylene and carbon fiber and epoxy matrix
/ Polymer
41
: 3841~
[journal]
Karsli NG
/ 2011
/ Effects of maleated polypropylene on the morphology, thermal and mechanical properties of short carbon fiber reinforced polypropylene composites
/ Mater Design
32
: 4069~
[journal]
Taketa I
/ 2010
/ Interply hybrid composites with carbon fiber reinforced polypropylene and self-reinforced polypropylene
/ Composites A
41
: 927~
[journal]
Rezaei F
/ 2009
/ Effect of fiber length on thermomechanical properties of short carbon fiber reinforced polypropylene composites
/ Mater Design
30
: 260~
[journal]
Fu SY
/ 1999
/ Fracture resistance of short-glass-fiber-reinforced and short-carbon-fiber-reinforced polypropylene under Charpy impact load and its dependence on processing
/ J Mater Process Technol
89-90
: 501~
[journal]
Li J
/ 2009
/ The research on the interfacial compatibility of polypropylene composite filled with surface treated carbon fiber
/ Appl Surf Sci
255
: 8682~