Carbon Letters 2023 KCI Impact Factor : 1.35 KCI-WoS Impact Factor : 6.04
-
pISSN : 1976-4251 / eISSN : 2233-4998
- https://journal.kci.go.kr/carbon
KJCKorea
Journal Central
Effects of electrochemical oxidation of carbon fibers on interfacial shear strength using a micro-bond method
- Carbon Letters
- Abbr : Carbon Lett.
- 2016, 19(), pp.32-39
- Publisher : Korean Carbon Society
- Research Area : Natural Science > Natural Science General > Other Natural Sciences General
Dong-Kyu Kim 1, An Kay-Hyeok 2, 방윤혁 3, Kwac Lee-Ku 4, 오상엽 1, KIM Byung-Joo 2
1한국탄소융합기술원
2(재) 한국탄소융합기술원
3(주)효성 섬유화학전자통신연구소
4전주대학교
Accredited
ABSTRACT
In this work, we studied the effects of electrochemical oxidation treatments of carbon fibers (CFs) on interfacial adhesion between CF and epoxy resin with various current densities. The surface morphologies and properties of the CFs before and after electrochemical-oxidation-treatment were characterized using field emission scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and single-fiber contact angle. The mechanical interfacial shear strength of the CFs/epoxy matrix composites was investigated by using a micro-bond method. From the results, electrochemical oxidation treatment introduced oxygen functional groups and increased roughness on the fiber surface. The mechanical interfacial adhesion strength also showed higher values than that of an untreated CF-reinforced composite.
Statistics
-
332 Viewed
-
2 Downloaded
Tools
Issue List
Citation status
This is the result of checking the information with the same ISSN, publication year, volume, and start page between the WoS and the KCI journals. (as of 2022-07-25)
Total Citation Counts(KCI+WOS) (19) This is the number of times that the duplicate count has been removed by comparing the citation list of WoS and KCI.
Scopus Citation Counts (27) This is the result of checking the information with the same ISSN, publication year, volume, and start page between articles in KCI and the SCOPUS journals. (as of 2024-10-01)
* References for papers published after 2023 are currently being built.
[journal]
A. Diaz
/ 2014
/ Characterization of carbon fibers using X-ray phase nanotomography
/ Carbon
/ Elsevier BV
67
: 98~103
[journal]
Qi Yu
/ 2013
/ Degradation in mechanical and physical properties of carbon fiber/bismaleimide composite subjected to proton irradiation in a space environment
/ Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
/ Elsevier BV
298
: 42~46
[journal]
Mei Lv
/ 2015
/ Friction and wear behaviors of carbon and aramid fibers reinforced polyimide composites in simulated space environment
/ Tribology International
/ Elsevier BV
92
: 246~254
[journal]
양갑승
/ 2014
/
Pitch based carbon fibers for automotive body and electrodes
/ Carbon Letters
/ 한국탄소학회
15(3)
: 162~170
[journal]
Fan-Long Jin
/ 2015
/
Preparation and characterization of carbon fiber-reinforced thermosetting composites: a review
/ Carbon Letters
/ 한국탄소학회
16(2)
: 67~77
[journal]
신혜경
/ 2014
/
Preparation and characterization of polyacrylonitrile-based carbon fibers produced by electron beam irradiation pretreatment
/ Journal of Industrial and Engineering Chemistry
/ 한국공업화학회
20(5)
: 3789~3792
[journal]
Yuan Liu
/ 2015
/ An effective surface modification of carbon fiber for improving the interfacial adhesion of polypropylene composites
/ Materials & Design
/ Elsevier BV
88
: 810~819
[journal]
V.L. Zvetkov
/ 2013
/ The non-isothermal DSC kinetics of polyethylene tereftalate–epoxy compatible blends
/ Thermochimica Acta
/ Elsevier BV
553
: 16~22
[journal]
Chen Wang
/ 2015
/ Shear strength and fracture toughness of carbon fibre/epoxy interface: effect of surface treatment
/ Materials & Design
/ Elsevier BV
85
: 800~807
[journal]
Hua Yuan
/ 2012
/ Effect of surface modification on carbon fiber and its reinforced phenolic matrix composite
/ Applied Surface Science
/ Elsevier BV
259
: 288~293
[journal]
Song Hee Han
/ 2013
/ The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites
/ Composites Part B: Engineering
/ Elsevier BV
45(1)
: 172~177
[journal]
Gaixia Zhang
/ 2008
/ The surface analytical characterization of carbon fibers functionalized by H2SO4/HNO3 treatment
/ Carbon
/ Elsevier BV
46(2)
: 196~205
[journal]
J Gulyás
/ 2001
/ Electrochemical oxidation of carbon fibres: surface chemistry and adhesion
/ Composites Part A: Applied Science and Manufacturing
/ Elsevier BV
32(3-4)
: 353~360
[journal]
A. Fukunaga
/ 1999
/ Anodic surface oxidation mechanisms of PAN-based and pitch-based carbon fibres
/ Journal of Materials Science
/ Springer Nature
34(12)
: 2851~2854
[journal]
한웅
/ 2013
/
Effects of Crack Resistance Properties of Ozone-treated Carbon Fibers-reinforced Nylon-6 Matrix Composites
/ 공업화학
/ 한국공업화학회
24(4)
: 363~369
[journal]
Soo-Jin Park
/ 2005
/ Roles of acidic functional groups of carbon fiber surfaces in enhancing interfacial adhesion behavior
/ Materials Science and Engineering: A
/ Elsevier BV
408(1-2)
: 269~273
[journal]
Ok-Kyung Park
/ 2015
/ Effect of oxygen plasma treatment on the mechanical properties of carbon nanotube fibers
/ Materials Letters
/ Elsevier BV
156
: 17~20
[journal]
Hooseok Lee
/ 2015
/ Effect of plasma surface treatment of recycled carbon fiber on carbon fiber-reinforced plastics (CFRP) interfacial properties
/ Applied Surface Science
/ Elsevier BV
328
: 241~246
[journal]
Jie Liu
/ 2010
/ Interfacial and mechanical properties of carbon fibers modified by electrochemical oxidation in (NH4HCO3)/(NH4)2C2O4·H2O aqueous compound solution
/ Applied Surface Science
/ Elsevier BV
256(21)
: 6199~6204
[journal]
Zhaorui Li
/ 2012
/ Anodic Oxidation on Structural Evolution and Tensile Properties of Polyacrylonitrile Based Carbon Fibers with Different Surface Morphology
/ Journal of Materials Science & Technology
/ Elsevier BV
28(12)
: 1123~1129
[journal]
Xin Qian
/ 2012
/ Effect of ammonium-salt solutions on the surface properties of carbon fibers in electrochemical anodic oxidation
/ Applied Surface Science
/ Elsevier BV
259
: 238~244
[journal]
Tripathi D
/ 1998
/ Single fibre fragmentation test for assessing adhesion in fibre reinforced composites
/ J Mater Sci
33
: 1~
[journal]
F.M Zhao
/ 2000
/ Effect of interfacial adhesion and statistical fiber strength on tensile strength of unidirectional glass fiber/epoxy composites. Part I: experiment results
/ Composites Part A: Applied Science and Manufacturing
/ Elsevier BV
31(11)
: 1203~1214
[journal]
S ZHANDAROV
/ 2005
/ Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters
/ Composites Science and Technology
/ Elsevier BV
65(1)
: 149~160
[journal]
Terumasa Tsuda
/ 2011
/ Direct measurements of interfacial shear strength of multi-walled carbon nanotube/PEEK composite using a nano-pullout method
/ Composites Science and Technology
/ Elsevier BV
71(10)
: 1295~1300
[journal]
Andreas Domnanovich
/ 1996
/ Determination of interface parameters for carbon/carbon composites by the fibre-bundle pull-out test
/ Composites Science and Technology
/ Elsevier BV
56(9)
: 1017~1029
[journal]
Serge Zhandarov
/ 2014
/ An alternative method of determining the local interfacial shear strength from force–displacement curves in the pull-out and microbond tests
/ International Journal of Adhesion and Adhesives
/ Elsevier BV
55
: 37~42
[journal]
Bernard Miller
/ 1987
/ A microbond method for determination of the shear strength of a fiber/resin interface
/ Composites Science and Technology
/ Elsevier BV
28(1)
: 17~32
[journal]
W. B. Liu
/ 2013
/ Properties of carbon fiber sized with poly(phthalazinone ether ketone) resin
/ Journal of Applied Polymer Science
/ Wiley-Blackwell
128(6)
: 3702~3709
[journal]
Hao Wang
/ 2013
/ An improved microbond test method for determination of the interfacial shear strength between carbon fibers and epoxy resin
/ Polymer Testing
/ Elsevier BV
32(8)
: 1460~1465
[journal]
Baoying Liu
/ 2013
/ Interfacial shear strength of carbon fiber reinforced polyphenylene sulfide measured by the microbond test
/ Polymer Testing
/ Elsevier BV
32(4)
: 724~730
[journal]
Ludwig Wilhelmy
/ 1863
/ Ueber die Abhängigkeit der Capillaritäts-Constanten des Alkohols von Substanz und Gestalt des benetzten festen Körpers
/ Annalen der Physik und Chemie
/ Wiley-Blackwell
195(6)
: 177~217
[journal]
Ayyanna Habal
/ 2016
/ Comparison of Wilhelmy plate and Sessile drop methods to rank moisture damage susceptibility of asphalt – Aggregates combinations
/ Construction and Building Materials
/ Elsevier BV
113
: 351~358
[journal]
Frederick M. Fowkes
/ 1964
/ ATTRACTIVE FORCES AT INTERFACES
/ Industrial & Engineering Chemistry
/ American Chemical Society (ACS)
56(12)
: 40~52
[journal]
Harry J. Barraza
/ 2001
/ Wetting Behavior of Elastomer-Modified Glass Fibers
/ Langmuir
/ American Chemical Society (ACS)
17(17)
: 5288~5296
[journal]
Hyun-Il Kim
/ 2014
/ Effects of Oxyfluorination on Surface and Mechanical Properties of Carbon Fiber-Reinforced Polarized-Polypropylene Matrix Composites
/ Journal of Nanoscience and Nanotechnology
/ American Scientific Publishers
14(12)
: 9097~9102
[journal]
Joung-Man Park
/ 2002
/ Interfacial Adhesion and Microfailure Modes of Electrodeposited Carbon Fiber/Epoxy–PEI Composites by Microdroplet and Surface Wettability Tests
/ Journal of Colloid and Interface Science
/ Elsevier BV
249(1)
: 62~77
[journal]
Jiang Zhu
/ 2003
/ Improving the Dispersion and Integration of Single-Walled Carbon Nanotubes in Epoxy Composites through Functionalization
/ Nano Letters
/ American Chemical Society (ACS)
3(8)
: 1107~1113
[journal]
Zheng Liu
/ 2014
/ Interfacial Adhesion of Polyamide 66 Fibres to an Aqueous Polyurethane–Acrylic Hybrid Polymer Adhesive
/ The Journal of Adhesion
/ Informa UK Limited
90(4)
: 310~326
[journal]
최웅기
/ 2016
/
Mechanical interfacial adhesion of carbon fibers-reinforced polarized-polypropylene matrix composites: effects of silane coupling agents
/ Carbon Letters
/ 한국탄소학회
17(1)
: 79~84
This paper was written with support from the National Research Foundation of Korea.