Numerical analysis on foam reaction injection molding of polyurethane, Part A: Considering re-condensation of physical foam agent

HyukSu Han (한혁수); Hyun Nam Nam (남현남); Youngkee Eun (은영기); Su Yeon Lee (이수연); Jeong ho Nam (남정호); Jeong-ho Ryu (류정호); Sung Yoon Lee (이성윤); Jung In Kim (김정인)

doi:10.6111/JKCGCT.2016.26.5.209

Numerical analysis on foam reaction injection molding of polyurethane, Part A: Considering re-condensation of physical foam agent

Journal of the Korean Crystal Growth and Crystal Technology
Abbr : J. Korean Cryst. Growth Cryst. Technol.
2016, 26(5), pp.209-214
DOI : 10.6111/JKCGCT.2016.26.5.209
Publisher : The Korea Association Of Crystal Growth, Inc.
Research Area : Engineering > Materials Science and Engineering
Published : October 31, 2016

HyukSu Han ¹, Hyun Nam Nam ², Youngkee Eun ¹, Su Yeon Lee ¹, Jeong ho Nam ¹, Jeong-ho Ryu ³, Sung Yoon Lee ², Jung In Kim ¹

¹한국생산기술연구원
²(주)S&WISE
³한국교통대학교

Accredited

ABSTRACT

Foam reaction injection molding (FRIM) is a widely used process for manufacturing polyurethane foam with complex shapes. Numerical model for polyurethane foam forming reaction during FRIM process has been intensively investigated by a number of researchers to precisely predict final shapes of polyurethane foams. In this study, we have identified a problem related with a previous theoretical model for polyurethane foam forming reaction. Thus, previous theoretical model was modified based on experimental and computational results.

KEYWORDS

Reaction injection molding, Polyurethane foam, Numerical simulation

Citation status

* References for papers published after 2023 are currently being built.

[journal] C. Kim / 2000 / Environmentally friendly processing of polyurethane foam for thermal insulation / Polymer-Plastics Technology and Engineering 39 : 163~

[journal] M. S. Koo / 2001 / Reaction injection molding of polyurethane foam for improved thermal insulation / Polymer Engineering and Science 41 : 1177~

[journal] W. H. Lee / 2002 / Processing of polyurethane/polystyrene hybrid foam and numerical simulation / Fibers and Polymers 3 : 159~

[journal] S. A. Baser / 1994 / Modeling of the dynamics of R-11 blown polyurethane foam formation / Polymer Engineering & Science 34 : 632~

[journal] S. A. Baser / 1994 / Modeling of the dynamics of water and R-11 blown polyurethane foam formation / Polymer Engineering & Science 34 : 642~

[journal] D. Seo / 2005 / Numerical analysis on reaction injection molding of polyurethane foam by using a finite volume method / Polymer 46 : 6482~

[book] S.V. Patankar / 1980 / Numerical heat transfer and fuild flow

[journal] S. R. Mathur / 1997 / A pressure-based method for unstructured meshes / Numerical Heat Transfer Part B-Fundamentals 31 : 195~

[journal] C. W. Hirt / 1981 / Volume of fluid(VOF)method for the dynamics of free boundaries / Journal of Computational Physics 39 : 201~

[journal] R. Tesser / 2004 / Modeling of polyurethane foam formation / Journal of Applied Polymer Science 92 : 1875~

KJCKorea
Journal Central

Journal of the Korean Crystal Growth and Crystal Technology 2023 KCI Impact Factor : 0.19

Numerical analysis on foam reaction injection molding of polyurethane, Part A: Considering re-condensation of physical foam agent

ABSTRACT

KEYWORDS

Citation status

* References for papers published after 2023 are currently being built.

Journal of the Korean Crystal Growth and Crystal Technology 2023 KCI Impact Factor : 0.19

Numerical analysis on foam reaction injection molding of polyurethane, Part A: Considering re-condensation of physical foam agent

ABSTRACT

KEYWORDS

Statistics

Tools

Issue List

Citation status

KCI Citation Counts (0)

REFERENCES (10) * References for papers published after 2023 are currently being built.

Search PDF

Citation

* References for papers published after 2023 are currently being built.