본문 바로가기
  • Home

Performance Analysis of Implementation on IoT based Smart Wearable Mine Detection Device

  • Journal of The Korea Society of Computer and Information
  • Abbr : JKSCI
  • 2019, 24(12), pp.51-57
  • DOI : 10.9708/jksci.2019.24.12.051
  • Publisher : The Korean Society Of Computer And Information
  • Research Area : Engineering > Computer Science
  • Received : November 18, 2019
  • Accepted : December 17, 2019
  • Published : December 31, 2019

kim chi wook 1

1서울과학기술대학교 IT융합기술연구소

Accredited

ABSTRACT

In this paper, we analyzed the performance of IoT based smart wearable mine detection device. There are various mine detection methods currently used by the military. Still, in the general field, mine detection is performed by visual detection, probe detection, detector detection, and other detection methods. The detection method by the detector is using a GPR sensor on the detector, which is possible to detect metals, but it is difficult to identify non-metals. It is hard to distinguish whether the area where the detection was performed or not. Also, there is a problem that a lot of human resources and time are wasted, and if the user does not move the sensor at a constant speed or moves too fast, it is difficult to detect landmines accurately. Therefore, we studied the smart wearable mine detection device composed of human body antenna, main microprocessor, smart glasses, body-mounted LCD monitor, wireless data transmission, belt type power supply, black box camera, which is to improve the problem of the error of mine detection using unidirectional ultrasonic sensing signal. Based on the results of this study, we will conduct an experiment to confirm the possibility of detecting underground mines based on the Internet of Things (IoT). This paper consists of an introduction, experimental environment composition, simulation analysis, and conclusion. Introduction introduces the research contents such as mines, mine detectors, and research progress. It consists of large anti-personnel mine, M16A1 fragmented anti-mine, M15 and M19 antitank mines, plastic bottles similar to mines and aluminum cans. Simulation analysis is conducted by using MATLAB to analyze the mine detection device implementation performance, generating and transmitting IoT signals, and analyzing each received signal to verify the detection performance of landmines. Then we will measure the performance through the simulation of IoT-based mine detection algorithm so that we will prove the possibility of IoT-based detection landmine.

Citation status

* References for papers published after 2023 are currently being built.