@article{ART001093702},
author={Kim, Sung-Soo},
title={An Analysis of the Reasons for the Failure of Casting Metal Movable Types from Porcelain Clay(陶土鑄造法) and How to Improve Its Efficiencies},
journal={Journal of Studies in Bibliography},
issn={1225-5246},
year={2006},
number={35},
pages={41-58}
TY - JOUR
AU - Kim, Sung-Soo
TI - An Analysis of the Reasons for the Failure of Casting Metal Movable Types from Porcelain Clay(陶土鑄造法) and How to Improve Its Efficiencies
JO - Journal of Studies in Bibliography
PY - 2006
VL - null
IS - 35
PB - Korean Society of Bibliography
SP - 41
EP - 58
SN - 1225-5246
AB - This research analyzes the reasons why the method of casting movable types from porcelain clay, which was described in Husaengnok(厚生錄) failed. It also examines the major problems of testing this method, as discussed in my earlier research, and suggests how to improve its efficiencies. By so doing, an attempt was made to build a theoretical base for the fourth test in order to prove the feasibility of this method. Major findings are as follows: First, in the second chapter, the results from the first and second tests which faithfully followed the procedures and practices of casting movable types, as described in Husaengnok, were analyzed. The result shows that, while casting movable types, based on the text of Husaengnok, missed were such factors as ① the technical know-hows about depressed engraving in the fourth stage, ② the process of preparing for the height of individual characters as required after the fourth stage, and ③ how to cut characters in the seventh stage. As a result, the test was not properly done. Second, in the third chapter, in order to solve the problems earlier identified, a test was made to press wooden types on the porcelain clay, by applying the method of inlaying on Goryeo celadon porcelain, when characters from clay mold were engraved. In brief, in the third test, by forming the molds of individual characters, and establishing the method of inlaying characters by pressing them on porcelain clay, it was explored how to cast individual movable types from porcelain clay.
KW - Casting Metal Movable Types from Porcelain Clay(陶土鑄造法);Inlay;Failure Analysis;Efficiency Improvement
DO -
UR -
ER -
Kim, Sung-Soo. (2006). An Analysis of the Reasons for the Failure of Casting Metal Movable Types from Porcelain Clay(陶土鑄造法) and How to Improve Its Efficiencies. Journal of Studies in Bibliography, 35, 41-58.
Kim, Sung-Soo. 2006, "An Analysis of the Reasons for the Failure of Casting Metal Movable Types from Porcelain Clay(陶土鑄造法) and How to Improve Its Efficiencies", Journal of Studies in Bibliography, no.35, pp.41-58.
Kim, Sung-Soo "An Analysis of the Reasons for the Failure of Casting Metal Movable Types from Porcelain Clay(陶土鑄造法) and How to Improve Its Efficiencies" Journal of Studies in Bibliography 35 pp.41-58 (2006) : 41.
Kim, Sung-Soo. An Analysis of the Reasons for the Failure of Casting Metal Movable Types from Porcelain Clay(陶土鑄造法) and How to Improve Its Efficiencies. 2006; 35 : 41-58.
Kim, Sung-Soo. "An Analysis of the Reasons for the Failure of Casting Metal Movable Types from Porcelain Clay(陶土鑄造法) and How to Improve Its Efficiencies" Journal of Studies in Bibliography no.35(2006) : 41-58.
Kim, Sung-Soo. An Analysis of the Reasons for the Failure of Casting Metal Movable Types from Porcelain Clay(陶土鑄造法) and How to Improve Its Efficiencies. Journal of Studies in Bibliography, 35, 41-58.
Kim, Sung-Soo. An Analysis of the Reasons for the Failure of Casting Metal Movable Types from Porcelain Clay(陶土鑄造法) and How to Improve Its Efficiencies. Journal of Studies in Bibliography. 2006; 35 41-58.
Kim, Sung-Soo. An Analysis of the Reasons for the Failure of Casting Metal Movable Types from Porcelain Clay(陶土鑄造法) and How to Improve Its Efficiencies. 2006; 35 : 41-58.
Kim, Sung-Soo. "An Analysis of the Reasons for the Failure of Casting Metal Movable Types from Porcelain Clay(陶土鑄造法) and How to Improve Its Efficiencies" Journal of Studies in Bibliography no.35(2006) : 41-58.
