2007, Vol.19, No.2

Textile Coloration and Finishing KCI Impact Factor : 0.0

pISSN : 1229-0033 / eISSN : 2234-036X
https://journal.kci.go.kr/ksdf

In order to improve the light fastness of a natural colorant berberine, several natural antioxidants such as gallic acid, L-ascorbic acid, and α-tocopherol were applied by aftertreatment method. Even though the increase in light fastness of berberine colorant was not substantial, L-ascorbic acid was the most effective. It was considered that this improvement of the light fastness was due to high antioxidation action of L-ascorbic acid to colorant, which led very highly excited species of the colorant formed by photo-energy to return to the original stable state without being decomposed.

Photopolymerization of 2-hydroxyethyl methacrylate(HEMA), in the presence of ethyleneglycol dimethacrylate(EGDMA) and 1-Hydroxycyclohexyl phenyl ketone as crosslinker and photoinitiator, respectively, produced crosslinked poly-HEMA hydrogels. The hydrogels were colored by the exhaustion of vinylsulphone-type reactive dyes. Good colorfastness to laundering was achieved when colored with C.I. Reactive Black 5. We investigated that the effect of coloration on the hydrophilicity and swelling properties of the films. More hydrophilic gel-surfaces were generated with an increase in coloration and crosslinking. Higher surface energy was observed with higher crosslinking level. The more rapid and higher water swellability of poly-HEMA gels after coloration may be resulted from a more opened gel structure by the easier hydration of the hydrophilic sulphonic acid groups of the reacted dyes in water.

This research article explores the use of phthalocyanine reactive dye on nylon substrate. The effect of factors such as pH, temperature, liquor ratio and alkali addition on level of dye exhaustion, fixation and total fixation efficiency. Low pH, high temperature and low liquor ratio were found to be suitable conditions for maximum % exhaustion values. The effect of sulphatoethylsulphone (SES) and vinylsulphone (VS) form of the dyes on level of dye fixation was also discussed. The optimized exhaustion (%E), fixation (%F) and total fixation efficiency were determined. Modification of the dyeing process with alkali addition displayed that dye fixation (%) increased by alkali addition. Vinylsulphone (VS) moiety of the dye was found to be superior for maximum fixation (%F). Appropriate predictable empirical models, relatively a new approach in dyeing processes, were developed incorporating interactions effects of temperature, pH and liquor ratio for predicting % exhaustion, fixation and total fixation efficiency. The significance of the mathematical model developed was ascertained using microsoft excel regression (solver) analysis module. High correlation coefficient was obtained (R2=0.9895 for % exhaustion, R2=0.9932 for fixation, R2=0.9965 for total fixation efficiency) for the model which shows prominent prediction capacity of the model for any conditions. The predictable polynomial equations developed from the experimental results were thoroughly analyzed by ANOVA (Analysis of Variance) statistical concepts.