본문 바로가기
  • Home

Colour Change of Black-dyed PET Fabrics by Sputter Coloration and Their Physical Properties

  • Textile Coloration and Finishing
  • Abbr : Text. Color. and Finish.
  • 2006, 18(4), pp.11-19
  • Publisher : The Korean Society Of Dyers And Finishers
  • Research Area : Engineering > Fiber Engineering > Dyeing Engineering

구 강 1 원은희 2 박영미 1

1영남대학교
2금오텍

Accredited

ABSTRACT

Black-dyed PET fabrics were sputtered with stainless steel through DC-magnetron type device to investigate the possibility of coloration effect, and then considered the morphological structure and physical characteristics such as water permeation ability and washing fastness. Change in color was estimated on the basis of CIELAB color system. The color coordination of metal plated PET was shifted to yellow-red from red-blue. Colour difference(△E*) was increased by sputtering conditions with increasing ion current and treatment time. Especially, Lightness(L*) value of PET was remarkably increased by sputtering, whereas Chroma(C*) increased gradually. From SEM analysis, rough and uneven craters were found and thickened on the fiber surfaces with longer sputtering time. And washing fastness was a little poor and absorption ability slightly decreased. There were little changes of breaking load and breaking extension. It was evident that observed uneven craters in the plated thin layer resulted in the colour change of PET fabrics by sputtering treatments.

Citation status

* References for papers published after 2023 are currently being built.