Comparative study on carboxylated styrene butadiene rubber composites reinforced by hybrid fillers of rice bran carbon and graphite carbon

Yuan Fan; Qingyuan Li; Xiangxu Li; Dam-Hee Lee (이담희); Ur Ryong Cho (조을룡)

doi:10.5714/CL.2018.27.072

Comparative study on carboxylated styrene butadiene rubber composites reinforced by hybrid fillers of rice bran carbon and graphite carbon

Carbon Letters
Abbr : Carbon Lett.
2018, 27(1), pp.72-80
DOI : 10.5714/CL.2018.27.072
Publisher : Korean Carbon Society
Research Area : Natural Science > Natural Science General > Other Natural Sciences General

Yuan Fan ¹, Qingyuan Li ¹, Xiangxu Li ¹, Dam-Hee Lee ¹, Ur Ryong Cho ¹

¹한국기술교육대학교

Accredited

ABSTRACT

In the present work, a comparative study of the mechanical behavior of two series of elastomeric composites, based on carboxylated styrene butadiene rubber (X-SBR) and reinforced with rice bran carbon (RBC) and graphite, is reported. Hybrid composites of X-SBR filled with RBC-graphite were also investigated in terms of the cure characteristics, hardness, tensile properties, abrasion resistance, and swelling. It was observed that the cure times decreased with the incorporation of a carbon filler whereas the torque difference, tensile strength, tensile modulus, hardness, and swelling resistance increased compared to the neat X-SBR revealing a favorable characteristic of crosslinking. Dynamic rheological analysis showed that the G' values of the composites, upon the addition of RBC-graphite, were changed to some extent. This demonstrates that the presence of a strongly developed network of fillers will ensure a reinforcing characteristic in a polymer matrix.

KEYWORDS

rice bran carbon, graphite, mechanical properties, composites, carboxylated styrene butadiene rubber

Citation status

This is the result of checking the information with the same ISSN, publication year, volume, and start page between the WoS and the KCI journals. (as of 2024-07-28)

Total Citation Counts(KCI+WOS) (6) This is the number of times that the duplicate count has been removed by comparing the citation list of WoS and KCI.

Scopus Citation Counts (8) This is the result of checking the information with the same ISSN, publication year, volume, and start page between articles in KCI and the SCOPUS journals. (as of 2024-10-01)

* References for papers published after 2023 are currently being built.

[journal] Saowapark T / 2017 / Role of eco-friendly molasses carbon powder as a filler in natural rubber vulcanizates / Mater Today Proc 4 : 6450~

[journal] Nanda M / 2008 / Physico-mechanical and electrical properties of conductive carbon black reinforced chlorosulfonated polyethylene vulcanizates / eXPRESS Polym Lett 2 : 855~

[journal] 이시은 / 2014 / Mechanical and thermal properties of MWCNT-reinforced epoxy nanocomposites by vacuum assisted resin transfer molding / Carbon Letters / 한국탄소학회 15(1) : 32~37

[journal] Fan-Long Jin / 2013 / Polymer matrices for carbon fiber-reinforced polymer composites / Carbon Letters / 한국탄소학회 14(2) : 76~88

[journal] Kueseng K / 2006 / Natural rubber nanocomposites with SiC nanoparticles and carbon nanotubes / Eur Polym J 42 : 220~

[journal] Mao Y / 2013 / High performance graphene oxide based rubber composites / Sci Rep 3 : 2508~

[journal] Kim H / 2010 / Graphene/polymer nanocomposites / Macromolecules 43 : 6515~

[journal] Liu Z / 2017 / Enhanced mechanical and thermal properties of SBR composites by introducing graphene oxide nanosheets decorated with silica particles / Composites Part A Appl Sci Manuf 102 : 236~

[journal] Lin Y / 2016 / The filler-rubber interface and reinforcement in styrene butadiene rubber composites with graphene/silica hybrids: a quantitative correlation with the constrained region / Composites Part A Appl Sci Manuf 86 : 19~

[journal] Song S / 2017 / Carbon nanotube/reduced graphene oxide hybrid for simultaneously enhancing the thermal conductivity and mechanical properties of styrene-butadiene rubber / Carbon 123 : 158~

[journal] Lin Y / 2015 / Effect of ZnO nanoparticles doped graphene on static and dynamic mechanical properties of natural rubber composites / Composites Part A Appl Sci Manuf 70 : 35~

[journal] Varghese TV / 2013 / Reinforcement of acrylonitrile butadiene rubber using pristine few layer graphene and its hybrid fillers / Carbon 61 : 476~

[journal] Mondal S / 2017 / Elastomer reinforcement by graphene nanoplatelets and synergistic improvements of electrical and mechanical properties of composites by hybrid nano fillers of graphene carbon black & graphene-MWCNT / Composites Part A Appl Sci Manuf 102 : 154~

[journal] Yan L / 2012 / Chemistry and physics of a single atomic layer: strategies and challenges for functionalization of graphene and graphene-based materials / Chem Soc Rev 41 : 97~

[journal] Wang R / 2016 / Design, preparation and properties of bio-based elastomer composites aiming at engineering applications / Compos Sci Technol 133 : 136~

[journal] Manocha LM / 2005 / Mechanical properties of carbon/carbon composites densified by HIP technique / Carbon Lett 6 : 6~

[journal] Zhang Y / 2016 / The properties of rice bran carbon/nitrile-butadiene rubber composites fabricated by latex compounding method / Polym Compos 39 : E687~

[journal] Li MC / 2014 / Mechanical, thermal and friction properties of rice bran carbon/nitrile rubber composites: Influence of particle size and loading / Mater Des 63 : 565~

[journal] Yin C / 2013 / Preparation and properties of silica/styrene butadiene rubber masterbatches by latex co-coagulating technology / Polym Compos 35 : 22770~

[journal] Wang L / 2010 / Study on the structure-mechanical properties relationship and antistatic characteristics of SSBR composites filled with <TEX>$SiO_2$</TEX>/CB / J Appl Polym Sci 118 : 338~

[journal] D'Agostino A / 2011 / Development of nanocomposite based on hydroxyethylmethacrylate and functionalized fumed silica: mechanical, chemico-physical and biological characterization / J Mater Sci 22 : 481~

[journal] Mooney M / 1940 / A theory of large elastic deformation / J Appl Phys 11 : 582~

[journal] Zhang Y / 2016 / Surface modification of novel rice bran carbon functionalized with (3-mercaptopropyl) trimethoxysilane and its influence on the properties of styrene-butadiene rubber composites / J Compos Mater 50 : 2987~

[journal] Wang Z / 2010 / Novel percolation phenomena and mechanism of strengthening elastomers by nanofillers / Phys Chem Chem Phys 12 : 3014~

[journal] Zhang Y / 2015 / Fabrication and characterization of rice bran carbon/styrene butadiene rubber composites fabricated by latex compounding method / Polym Compos 38 : 2594~

[journal] Payne AR / 1972 / Effect of vulcanization on the low-strain dynamic properties of filled rubbers / J Appl Polym Sci 16 : 1191~

[journal] Wang L / 2013 / Filler dispersion evolution of acrylonitrile-butadiene rubber/graphite nanocomposites during processing / Composites Part A Appl Sci Manuf 47 : 135~

[journal] Choi SS / 2002 / Improvement of properties of silica-filled natural rubber compounds using polychloroprene / J Appl Polym Sci 83 : 2609~

[journal] Choi SS / 2004 / Influence of filler type and content on properties of styrene-butadiene rubber (SBR) compound rein forced with carbon black or silica / Polym Adv Technol 15 : 122~

[journal] 이상민 / 2015 / Bulk graphite: materials and manufacturing process / Carbon Letters / 한국탄소학회 16(3) : 135~146

KJCKorea
Journal Central

Carbon Letters 2023 KCI Impact Factor : 1.35 KCI-WoS Impact Factor : 6.04

Comparative study on carboxylated styrene butadiene rubber composites reinforced by hybrid fillers of rice bran carbon and graphite carbon

ABSTRACT

KEYWORDS

Citation status

This is the result of checking the information with the same ISSN, publication year, volume, and start page between the WoS and the KCI journals. (as of 2024-07-28)

Total Citation Counts(KCI+WOS) (6) This is the number of times that the duplicate count has been removed by comparing the citation list of WoS and KCI.

Scopus Citation Counts (8) This is the result of checking the information with the same ISSN, publication year, volume, and start page between articles in KCI and the SCOPUS journals. (as of 2024-10-01)

* References for papers published after 2023 are currently being built.

Carbon Letters 2023 KCI Impact Factor : 1.35 KCI-WoS Impact Factor : 6.04

Comparative study on carboxylated styrene butadiene rubber composites reinforced by hybrid fillers of rice bran carbon and graphite carbon

ABSTRACT

KEYWORDS

Statistics

Tools

Issue List

Citation status

KCI Citation Counts (0)

WoS Citation Counts (6) This is the result of checking the information with the same ISSN, publication year, volume, and start page between the WoS and the KCI journals. (as of 2024-07-28)

Total Citation Counts(KCI+WOS) (6) This is the number of times that the duplicate count has been removed by comparing the citation list of WoS and KCI.

Scopus Citation Counts (8) This is the result of checking the information with the same ISSN, publication year, volume, and start page between articles in KCI and the SCOPUS journals. (as of 2024-10-01)

REFERENCES (30) * References for papers published after 2023 are currently being built.

Search PDF

Citation

This is the result of checking the information with the same ISSN, publication year, volume, and start page between the WoS and the KCI journals. (as of 2024-07-28)

* References for papers published after 2023 are currently being built.