Fabrication and characterization of Cu50-Fe50 alloy (Cu50-Fe50 합금의 제조 및 특성평가)

Jung-Il Lee (이정일); DILLI RAM LAMICHHANE (딜리 람); Jong Min Paeng (팽종민); Hyun Su Cho (조현수); Su Min Yang (양수민); Jeong-ho Ryu (류정호)

doi:10.6111/JKCGCT.2018.28.4.175

Fabrication and characterization of Cu50-Fe50 alloy

Journal of the Korean Crystal Growth and Crystal Technology
Abbr : J. Korean Cryst. Growth Cryst. Technol.
2018, 28(4), pp.175-178
DOI : 10.6111/JKCGCT.2018.28.4.175
Publisher : The Korea Association Of Crystal Growth, Inc.
Research Area : Engineering > Materials Science and Engineering
Published : August 31, 2018

Jung-Il Lee ¹, DILLI RAM LAMICHHANE ¹, Jong Min Paeng ¹, Hyun Su Cho ¹, Su Min Yang ¹, Jeong-ho Ryu ¹

¹한국교통대학교

Accredited

ABSTRACT

Copper is a well know material for use as heat sink or heat exchanger. However, copper has a considerable low tensile strength and temperature limit. A material that has a good thermal conductivity, low cost, but also excellent mechanical properties are desired. In order to identify the mechanism for the material properties of cast Cu-Fe alloys, Cu50-Fe50 (wt.%) alloy was produced by using a high-frequency induction furnace, a typical metal casting process. The Cu-Fe alloy consists of Cu, α-Fe, γ-Fe with dendrite structures. The crystal structure and microstructure of the prepared Cu50-Fe50 alloy were systematically examined using XRD, FE-SEM, EDS and XRF for electrical devices.

KEYWORDS

Cu50-Fe50 alloy, Crystal structures, Microstructure, EDS mapping

Citation status

* References for papers published after 2023 are currently being built.

[book] Max Hansen / 1958 / Constitution of Binary Alloys / McGraw-Hill Book Company, Inc. : 353~

[journal] M. Perez / 2005 / Low-temperature solubility of copper in iron: experimental study using thermoelectric power, small angle X-ray scattering and tomographic atom probe / Philos. Mag. A 85 : 2197~

[journal] P.J. Othen / 1994 / High-resolution electron microscopy studies of the structure of Cu precipitates in <TEX>${\alpha}$</TEX>-Fe / Philos. Mag. A 70 : 1~

[journal] L.S. Darken / 1946 / The system iron-oxygen II. Equilibria and thermodynamics of liquid oxide and other phases / J. Am. Chem. Soc. 68 : 798~

[journal] T. Gladman / 1999 / Precipitation hardening in metals / Mater. Sci. Technol. 15 : 30~

[journal] G. Bockstiegel / 1959 / Nature and causes of volume changes in the sintering of iron-copper and iron-copper-graphite powder compacts / Translated from Stahl Und Eisen 17 : 1187~

[journal] N. Wanderka / 2001 / Characterization of nanoscaled heterogeneities in mechanically alloyed and compacted CuFe / Ultramicroscopy 89 : 189~

[journal] O. Drbohilav / 1995 / Mechanical alloying and thermal decomposition of ferromagnetic nanocrystalline f.c.c.-<TEX>$Cu_{50}Fe_{50}$</TEX> / Acta Metall. Mater. 43 : 1799~

[journal] J.Z. Jiang / 1998 / Mechanical alloying in the Fe-Cu system / Mater. Sci. Eng. A 242 : 268~

[journal] Y. Yang / 2001 / Mechanical alloying, fine structure and thermal decomposition of nanocrystalline FCC-<TEX>$Fe_{60}Cu_{40}$</TEX> / Physica B 293 : 249~

[journal] J. Xu / 1999 / Deformation-assisted decomposition of unstable <TEX>$Fe_{50}Cu_{50}$</TEX> solid solution during low-energy ball milling / Acta Mater. 47 : 1241~

KJCKorea
Journal Central

Journal of the Korean Crystal Growth and Crystal Technology 2023 KCI Impact Factor : 0.19

Fabrication and characterization of Cu50-Fe50 alloy

ABSTRACT

KEYWORDS

Citation status

* References for papers published after 2023 are currently being built.

Journal of the Korean Crystal Growth and Crystal Technology 2023 KCI Impact Factor : 0.19

Fabrication and characterization of Cu50-Fe50 alloy

ABSTRACT

KEYWORDS

Statistics

Tools

Issue List

Citation status

KCI Citation Counts (0)

REFERENCES (11) * References for papers published after 2023 are currently being built.

Search PDF

Citation

* References for papers published after 2023 are currently being built.