본문 바로가기
  • Home

Optimization of slurry for manufacturing spray-dried aluminum silicate granular powder

  • Journal of the Korean Crystal Growth and Crystal Technology
  • Abbr : J. Korean Cryst. Growth Cryst. Technol.
  • 2021, 31(6), pp.264~269
  • DOI : 10.6111/JKCGCT.2021.31.6.264
  • Publisher : The Korea Association Of Crystal Growth, Inc.
  • Research Area : Engineering > Materials Science and Engineering
  • Received : November 12, 2021
  • Accepted : December 3, 2021
  • Published : December 31, 2021

Hyeon Jin Kim 1,  Sun, woogyeong 1,  Jo, HYE SOO 1,  Seog-Young Yoon 1

1부산대학교

Accredited

ABSTRACT

In this study, amorphous aluminum silicate powder was prepared using co-precipitation method, and the influence of spray-dried aluminum silicate granular powder was analyzed and optimized by controlling the amount of aluminum silicate powder and dispersant added to the slurry. As a result, granular powder was optimally produced under the conditions of powder content of aluminum silicate slurry of 27.5 wt% or less, dispersant addition amount of 0.8 wt% or more, pH 6~9. An average particle size of granular powder showed approximately 14m at the powder contents of 20 and 22.5 wt% of the slurry, and approximately 19m at the powder contents of 25 and 27.5 wt% of the slurry.

Journal Copyright Policy

BY-NC 아이콘

This license enables reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.

Citation status

* References for papers published after 2025 are currently being built.