본문 바로가기
  • Home

Study on the properties of aluminum nitride sintered using an induction furnace without sintering additives

  • Journal of the Korean Crystal Growth and Crystal Technology
  • Abbr : J. Korean Cryst. Growth Cryst. Technol.
  • 2024, 34(3), pp.98~102
  • DOI : 10.6111/JKCGCT.2024.34.3.098
  • Publisher : The Korea Association Of Crystal Growth, Inc.
  • Research Area : Engineering > Materials Science and Engineering
  • Received : June 11, 2024
  • Accepted : June 18, 2024
  • Published : June 30, 2024

Hyo Min Choi 1,  Gyong-Phil Yin 2,  Jong-Won Yoon 1

1단국대학교
2(주)세라컴

Accredited

ABSTRACT

In this study, the crystal characteristics of commercial AlN powders with sizes of “μm” and “nm” were selected through XRD analysis and then sintered at different temperatures through an induction heating furnace to investigate the optimized sintering temperature and physical properties. The sintering temperature was 1,500, 1,700, and 1,900°C in the N₂ atmosphere, and the optimized sintering temperature conditions were established for the sintered AlN pellets using SEM, XRD, and Raman analysis. Additionally, impedance analysis was performed to confirm the electrical properties of the optimized AlN pellet without sintering additives.

Journal Copyright Policy

BY-NC 아이콘

This license enables reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.

Citation status

* References for papers published after 2025 are currently being built.