Investigation of the heating characteristics of microwave silicon carbide heaters under mechanochemical iodine curing process conditions (기계화학적 아이오딘 불융화 공정 조건에 따른 마이크로파 탄화규소 발열체의 발열 특성 연구)

Chang-Hun Hwang (황창훈); Jong-Ha Beak (백종하); Sang-In Kim (김상인); Sangyul Park (박상율); Se-Yun Kim (김세윤)

doi:10.6111/JKCGCT.2024.34.5.156

Investigation of the heating characteristics of microwave silicon carbide heaters under mechanochemical iodine curing process conditions

Journal of the Korean Crystal Growth and Crystal Technology
Abbr : J. Korean Cryst. Growth Cryst. Technol.
2024, 34(5), pp.156~162
DOI : 10.6111/JKCGCT.2024.34.5.156
Publisher : The Korea Association Of Crystal Growth, Inc.
Research Area : Engineering > Materials Science and Engineering
Received : September 11, 2024
Accepted : October 11, 2024
Published : October 31, 2024

Chang-Hun Hwang ¹, Jong-Ha Beak ¹, Sang-In Kim ¹, Sangyul Park ², Se-Yun Kim ¹

¹경남대학교
²대호아이엔티

Accredited

ABSTRACT

Silicon carbide (SiC), known for its excellent mechanical and chemical properties, is widely used in key industries such as aerospace, defense, and nuclear power generation. Due to its rapid heating characteristics when exposed to microwaves, SiC is being researched as a highly efficient heating element. In this study, Polycarbosilane (PCS) was treated by a mechanochemical reaction with iodine, followed by pyrolysis to create a microwave heating material. The effects of pyrolysis temperature and iodine additive content on microwave heating performance were investigated. The results showed that the fabricated specimen rapidly heated to a maximum of 800° C within approximately 60 sec and maintained a stable temperature of 700~750°C for up to 120 min

KEYWORDS

Silicon carbide, Mechanochemical Curing, Iodine Curing, Microwave heater, Polycarbosialne (PCS)

Citation status

This is the result of checking the information with the same ISSN, publication year, volume, and start page between the WoS and the KCI journals. (as of 2025-07-17)

Total Citation Counts(KCI+WOS) (1) This is the number of times that the duplicate count has been removed by comparing the citation list of WoS and KCI.

* References for papers published after 2024 are currently being built.

[journal] J. H. Eom / 2013 / Processing and properties of macroporous silicon carbide ceramics : A review / J. Asian. Ceram. Soc 1 : 220~

[journal] Y. Wang / 2022 / Synthesis, properties, and multifarious applications of SiC nanoparticles : A review / Ceram. Int 48 : 8882~

[journal] R. He / 2012 / Progress and challenges towards additive manufacturing of SiC ceramic / J. Adv. Ceram 10 : 637~

[journal] A. N. Qinglong / 2021 / Machining of SiC ceramic matrix composites : A review / Chinese J. Aeronaut 34 : 540~

[book] W. Krenkel / 2005 / Handbook of ceramic composites / Springer : 117~

[book] N. Eswara Prasad / 2017 / Aerospace materials and material technologies: Vol. 1: Aerospace materials / Springer : 371~

[book] C. Sauder / 2014 / Ceramic matrix composites: materials, modeling and technology / Wiley : 609~

[journal] H. Li / 2008 / Effect of the polycarbosilane structure on its final ceramic yield / J. Eur. Ceram. Soc 28 : 887~

[journal] T. Taki / 1989 / A study of the oxidation curing mechanism of polycarbosilane fibre by solid-state high-resolution nuclear magnetic resonance / J. Mater. Sci 24 : 1263~

[journal] M. Narisawa / 1995 / Reaction mechanism of the pyrolysis of polycarbosilane and polycarbosilazane as ceramic precursors / Bull. Chem. Soc. Jpn 68 : 1098~

[journal] Y. J. Yoo / 2020 / Effect of pyrolysis temperature and pressing load on the densification of amorphous silicon carbide block / J. Korean Cryst. Growth Cryst. Technol 30 : 271~

[journal] J. S. Hong / 2015 / Iodine diffusion during iodine-vapor curing and its effects on the morphology of polycarbosilane/silicon carbide fibers / J. Appl. Polym. Sci 132 : 42687~

[journal] H. Q. Ly / 2001 / Conversion of polycarbosilane(PCS)to SiC-based ceramic Part 1. Characterisation of PCS and curing products / J. Mater. Sci 36 : 4037~

[journal] A. Idesaki / 2001 / Application of electron beam curing for silicon carbide fiber synthesis from blend polymer of polycarbosilane and polyvinylsilane / Radiat. Phys. Chem 60 : 483~

[journal] K. Okamura / 1992 / Application of radiation curing in the preparation of polycarbosilane-derived SiC fibers / J. Inorg. Organomet. Polym 2 : 171~

[journal] Y. Hasegawa / 1994 / New curing method for polycarbosilane with unsaturated hydrocarbons and application to thermally stable SiC fibre / Compos. Sci. Technol 51 : 161~

[journal] J. S. Hong / 2014 / Low-temperature chemical vapour curing using iodine for fabrication of continuous silicon carbide fibres from low-molecular-weight polycarbosilane / J. Mater. Chem. A 2 : 2781~

[journal] V. Verdingovas / 2015 / Effect of iodine on the corrosion of Au-Al wire bonds / Corros Sci 97 : 161~

[journal] N. R. Rose / 2002 / Iodine : an environmental trigger of thyroiditis / Autoimmin. Rev 1 : 97~

[journal] E. Boldyreva / 2013 / Mechanochemistry of inorganic and organic systems : what is similar, what is different? / Chem. Soc. Rev 42 : 7719~

[journal] Y.J. Yoo / 2021 / Microwave-assisted heating behavior of amorphous SiC fibers derived from polycarbosilane / Mater. Res. Express 8 : 035603~

[journal] C. Ke / 2022 / Energy absorption performances of silicon carbide particles during microwave heating process / Chem. Eng. Process 172 : 108796~

[journal] Z. Shen / 2020 / Recent progress in SiC nanowires as electromagnetic microwaves absorbing materials / J. Alloy. Compd 815 : 15238~

[journal] H. Sugawara / 2014 / Behavior of microwaveheated silicon carbide particles at frequencies of 2.0~13.5 GHz / Appl. Phys. Lett 105 : 034103~

[journal] Y. J. Joo / 2019 / Effect of pyrolysis temperature on heat-generating behavior and morphology of SiC fiber mats / J. Ceram. Process. Res 20 : 563~

[journal] Y. Hasegawa / 1983 / Synthesis of continuous silicon carbide fiber : Part3 Pyrolysis process of polycarbosilane and structure of the products / J. Mater. Sci 18 : 3633~

KJCKorea
Journal Central

Journal of the Korean Crystal Growth and Crystal Technology 2024 KCI Impact Factor : 0.2

Investigation of the heating characteristics of microwave silicon carbide heaters under mechanochemical iodine curing process conditions

ABSTRACT

KEYWORDS

Citation status

This is the result of checking the information with the same ISSN, publication year, volume, and start page between the WoS and the KCI journals. (as of 2025-07-17)

Total Citation Counts(KCI+WOS) (1) This is the number of times that the duplicate count has been removed by comparing the citation list of WoS and KCI.

* References for papers published after 2024 are currently being built.

Journal of the Korean Crystal Growth and Crystal Technology 2024 KCI Impact Factor : 0.2

Investigation of the heating characteristics of microwave silicon carbide heaters under mechanochemical iodine curing process conditions

ABSTRACT

KEYWORDS

Statistics

Tools

Issue List

Citation status

KCI Citation Counts (0)

WoS Citation Counts (1) This is the result of checking the information with the same ISSN, publication year, volume, and start page between the WoS and the KCI journals. (as of 2025-07-17)

Total Citation Counts(KCI+WOS) (1) This is the number of times that the duplicate count has been removed by comparing the citation list of WoS and KCI.

REFERENCES (26) * References for papers published after 2024 are currently being built.

Search PDF

Citation

This is the result of checking the information with the same ISSN, publication year, volume, and start page between the WoS and the KCI journals. (as of 2025-07-17)

* References for papers published after 2024 are currently being built.