본문 바로가기
  • Home
Basic Search

Elastic properties of addition silicone interocclusal recording materials

  • Journal of Korean society of Dental Hygiene
  • Abbr : J Korean Soc Dent Hyg
  • 2012, 12(3), pp.513-520
  • Publisher : Korean Society of Dental Hygiene
  • Research Area : Medicine and Pharmacy > Dentistry

이영옥 1,  KIM KYOUNG NAM 2

1대전보건대학교
2연세대학교

Accredited

ABSTRACT

Objectives : In this study, contact angle and shore D hardness were measured, and a shark fin test was conducted after selecting five addition silicon(Blu-Mousse, BM; EXABITEⅡ, EX; PERFECT, PF; RegisilⓇRigid, RE; SilagumⓇ, SI) in order to figure out the properties of elastomeric interocclusal recording materials and reduce errors at interocclusal recording. 8)Methods : A contact angle was measured using a contact angle analyzer. After placing a drop of liquid on the surface of the specimens of interocclusal recording materials, a contact angle was photographed with a CCD camera on the equipment. In terms of a shark fin test, interocclusal recording materials were mixed for the time proposed by the manufacturer and inserted into the split ring of the Shark fin device. Twenty (20) seconds exactly, a metal rod was removed to make the materials slowly absorbed. Once they hardened,fin height was measured with a caliper after separating molds and trimming the specimens. The shore D hardness was measured with a shore D hardness tester(Model HPDSD, Hans Schmidt & Co. Gmbh, Germany)in sixty (60) minutes after fabricating specimens. In each experiment, five specimens, mean and standard deviation were calculated. A one-way ANOVA test was performed at the p＞0.05 level of significance. In terms of correlation among the tests, Pearson correlation coefficient was estimated. For multiple comparison, Scheffe’s test was carried out. Results : A contact angle was the highest in EX with 99.23° (p＜0.05) while the result of the shark fin test was the longest in RE with 5.45mm. SI was the lowest (0.27mm) with statistical significance. Among the interocclusal recording materials, significant difference was observed in terms of means (p＜0.05). The shore D hardness was the highest in SI with 31.0 while RE was significantly low with 16.4 (p＜0.05). Among the materials, statistically significant difference was observed in terms of means when compared to the rest materials (RE), BM, RE and SI (PF and EX) and the remaining materials (BM and SI) (p＜0.05). In terms of correlations among the tests, a negative correlation occurred between shore D hardness and shark fin test(r=-0.823, p=0.000). Conclusions : According to the study above, it is necessary to understand the properties of interocclusal recording materials and consider contact angle, shark fin test and properties of shore D hardness to select appropriate materials.

Statistics

  • 263 Viewed
  • 85 Downloaded

Tools

Issue List

Citation status

* References for papers published after 2023 are currently being built.

Basic Search Advanced Search