Evaluation of fitness of metal-ceramic crown fabricated by cobalt-chrome alloy (코발트-크롬 합금으로 제작된 금속-도재관의 적합도 평가)

Jae-Hong Kim (김재홍); Kim won-Soo (김원수); 김기백

Evaluation of fitness of metal-ceramic crown fabricated by cobalt-chrome alloy

Journal of Korean society of Dental Hygiene
Abbr : J Korean Soc Dent Hyg
2013, 13(2), pp.361~368
Publisher : Korean Society of Dental Hygiene
Research Area : Medicine and Pharmacy > Dentistry

Jae-Hong Kim ¹, Kim won-Soo ², 김기백 ¹

¹고려대학교
²대전보건대학교

Accredited

ABSTRACT

Objectives : The purpose of this in vitro study was to evaluate the effect of firing cycles on the marginal and internal fit of metal ceramic crown. Methods : Ten same cases of stone models (abutment teeth 11) were manufactured. Ten cobalt-chrome cores were made per each models and the marginal and internal fit was evaluated through a silicone replica technique. The marginal and internal fit of specimens was measured twice. The first measurement was done after manufacturing cobalt-chrome alloy core and the second measurement was done after porcelain firing. T-test of paired sample for statistical analysis was executed with SPSS 12.0K for Windows (α=0.05). Results : Mean(SD) marginal and internal fit were 77.1(23.3) ㎛ for the cobalt-chrome alloy core group and 84.4(21.9) ㎛ for the metal-ceramic crown group. They were statistically significant differences between groups for marginal and internal fit (p<.05). Conclusions : All metal ceramic crowns showed marginal and internal fit ranged within the current clinical recommendations.

KEYWORDS

cobalt-chrome alloy, internal fit, marginal fit, metal-ceramic crown

Journal Copyright Policy

This license enables reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.

Citation status

* References for papers published after 2025 are currently being built.

[journal] 김영숙 / 2011 / A study of comparative the mastication capability and life quality of elderly people using dentures or implants / 한국치위생학회지 / 한국치위생학회 11(5) : 629~636

[journal] 박은미 / 2011 / The effect of satisfaction of dental esthetics on life quality related to oral health(OHIP-14) / 한국치위생학회지 / 한국치위생학회 11(6) : 863~870

[journal] Petteno D / 2000 / Comparison of marginal fit of 3 different metal-ceramic systems: an in vitro study / Int J Prosthodont 13(5) : 405~408

[book] Rosenstiel SF / 2006 / Contemporary fixed prosthodontics / Mosby : 606~608

[book] Anusavice KJ / 2003 / Phillips’science of dental materials / W.B. Saunders : 621~654

[journal] Pierce LH / 1989 / A status report of possible risks of base metal alloys and their components / J Prosthet Dent 62(2) : 234~238

[journal] Wassell RW / 2002 / Crowns and extra-coronal restorations: materials selection / Br Dent J 192(4) : 199~211

[journal] Vigolo P / 2008 / An in vitro evaluation of fit of zirconium -oxide-based ceramic four-unit fixed partial dentures, generated with three different CAD/CAM systems, before and after porcelain firing cycles and after glaze cycles / J Prosthodont 17(8) : 621~626

[journal] Jahangiri L / 2005 / Assessment of sensitivity and specificity of clinical evaluation of cast restoration marginal accuracy compared to stereomicroscopy / J Prosthet Dent 93(2) : 138~142

[journal] Mejia R / 2000 / Marginal fit of metal ceramic restorations subjected to a standardized postsoldering technique / J Prosthet Dent 83(5) : 535~539

[journal] Limkangwalmongkol P / 2007 / Precision of fit of two margin designs for metal–ceramic crowns / J Prosthodont 16(4) : 233~237

[journal] Foster LV / 1990 / Failed conventional bridge work from general dental practice: clinical aspects and treatment needs of 142 cases / Br Dent J 168(5) : 199~201

[journal] Tjan AH / 1991 / Marginal accuracy of complete crowns made from alternative casting alloys / J Prosthet Dent 66(2) : 157~164

[journal] Soriani NC / 2007 / Effect of the use of die spacer on the marginal fit of copings cast in Ni-Cr, Ni-Cr-Be and commercially pure titanium / Braz Dent J 18(3) : 225~230

[journal] Campbell SD / 1992 / Thermal cycling distortion of metal ceramics: part I-metal collar width / J Prosthet Dent 67(5) : 603~608

[journal] Fonseca JC / 2003 / Stress-relieving and porcelain firing cycle influence on marginal fit of commercially pure titanium and titanium-aluminium -vanadium copings / Dent Mater 19(7) : 686~691

[journal] Lakhani SA / 2002 / Influence of cold working and thermal treatment on the fit of implant supported metal ceramic fixed partial dentures / J Prosthet Dent 88(2) : 159~169

[journal] Hasanreisoglu U / 2005 / An analysis of maxillary anterior teeth: facial and dental proportions / J Prosthet Dent 94(6) : 530~538

[journal] Holmes JR / 1989 / Considerations in measurement of marginal fit / J Prosthet Dent 62(4) : 405~408

[journal] Reich S / 2008 / Clinical fit of fourunit zirconia posterior fixed dental prostheses / Eur J Oral Sci 116(6) : 579~584

[journal] Wettstein F / 2008 / Clinical study of the internal gaps of zirconia and metal frameworks for fixed partial dentures / Eur J Oral Sci 116(3) : 272~279

[journal] Harris IR / 1994 / A comparison of the fit of sparkeroded titanium copings and cast gold alloy copings / Int J Prosthodont 7(4) : 348~355

[journal] McLean JM / 1971 / The estimation of cement film thickness by an in vivo technique / Br Dent J 131(3) : 107~111

[journal] Fransson B / 1985 / The fit of metal-ceramic crowns, a clinical study / Dent Mater 1(5) : 197~199

[journal] Strating H / 1981 / Evaluation of the marginal integrity of ceramometal restorations: part I / J Prosthet Dent 46(1) : 59~65

[journal] Buchanan WT / 1981 / The effect of repeated firings and strength on marginal distortion in two ceramometal systems / J Prosthet Dent 45(5) : 502~506

[journal] Bridger DV / 1981 / Distortion of ceramometal fixed partial dentures during the firing cycle / J Prosthet Dent 45(5) : 507~514

[journal] Campbell SD / 1992 / Thermal cycling distortion of metal ceramics: part I—metal collar width / J Prosthet Dent 67(5) : 603~608

[journal] Balkaya MC / 2005 / Influence of firing cycles on the margin distortion of 3 all-ceramic crown systems / J Prosthet Dent 93(4) : 346~355

[journal] Komine F / 2007 / Influence of porcelain-firing procedures on the marginal distortion of electroformed metal-ceramic restorations / Quintessence Int 38(10) : E583~E588

[journal] Prakash P / 2012 / Effect of firing cycle and surface finishing on the sag resistance of long-span metal ceramic framework using base metal alloys—an in vitro study / MJAFI 68(2) : 142~150

KJCKorea
Journal Central

Journal of Korean society of Dental Hygiene 2025 KCI Impact Factor : 1.22