Comparison of surface characterization according to surface treatment of composite resin inlay (복합레진 인레이의 표면처리방법에 따른 표면특성 비교)

Myung-Jin Lee (이명진); Yu-Ri Choi (최유리); Min Kyung Kang (강민경)

doi:10.13065/jksdh.20190017

Comparison of surface characterization according to surface treatment of composite resin inlay

Journal of Korean society of Dental Hygiene
Abbr : J Korean Soc Dent Hyg
2019, 19(2), pp.307~315
DOI : 10.13065/jksdh.20190017
Publisher : Korean Society of Dental Hygiene
Research Area : Medicine and Pharmacy > Dentistry
Published : April 30, 2019

Myung-Jin Lee ¹, Yu-Ri Choi ², Min Kyung Kang ³

¹연세대학교 치과대학 치과생체재료공학교실
²한림성심대학교
³한서대학교

Accredited

ABSTRACT

Objectives: The aim of this study was to investigate the characterization of composite resin inlay surface with silane and non-thermal atmospheric pressure plasma treatment. Methods: Composite resin inlay was used as a specimen, which was treated by sandblasting + silane and sandblasting + plasma. The untreated specimens were assigned to the control group. Specimens were analyzed for surface roughness, color change, and chemical composition. Statistical analyses were performed using one-way ANOVA test ( p <0.05). Results: The present findings showed that the roughness and color changes of the plasma-treated surface were significantly lower than those of the silane-treated surface. In addition, a change in the chemical composition was observed on the plasma-treated surface. Conclusions: Based on the results, non-thermal atmospheric pressure plasma could be a potential tool for the cementation of composite resin inlay.

KEYWORDS

Inlay resin, Plasma gases, Silanes, Surface properties

Journal Copyright Policy

This license enables reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.

Citation status

* References for papers published after 2025 are currently being built.

[journal] N Ilie / 2013 / Bulk-fill Resin-based Composites: An In Vitro Assessment of Their Mechanical Performance / Operative Dentistry / Operative Dentistry 38(6) : 618~625

[journal] Álfheiður Ástvaldsdóttir / 2015 / Longevity of posterior resin composite restorations in adults – A systematic review / Journal of Dentistry / Elsevier BV 43(8) : 934~954

[journal] HM El-Damanhoury / 2014 / Polymerization Shrinkage Stress Kinetics and Related Properties of Bulk-fill Resin Composites / Operative Dentistry / Operative Dentistry 39(4) : 374~382

[journal] Marcondes M / 2016 / Clinical evaluation of indirect composite resin restorations cemented with different resin cements / J Adhes Dent 18(1) : 59~67

[journal] Melilli D / 2018 / Evaluation of marginal leakage after mechanical fatigue cycling of composite inlays luted with different cements / Gen Dent 66(4) : 51~55

[journal] 황인남 / 2008 / 복합레진 인레이, 온레이 / 대한치과의사협회지 / 대한치과의사협회 46(7) : 416~423

[journal] Prochnow EP / 2014 / Microtensile bond strength between indirect composite resin inlays and dentin : effect of cementation strategy and mechanical aging / J Adhes Dent 16(4) : 357~363

[journal] Borges GA / 2003 / Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics / J Prosthet Dent 89(5) : 479~488

[journal] V. H. Kiyan / 2007 / The Influence of Internal Surface Treatments on Tensile Bond Strength for Two Ceramic Systems / Operative Dentistry / Operative Dentistry 32(5) : 457~465

[journal] Porntida Visuttiwattanakorn / 2017 / Microtensile bond strength of repaired indirect resin composite / The Journal of Advanced of Prosthodontics / 대한치과보철학회 9(1) : 38~44

[journal] Jeffrey R. Piascik / 2012 / Surface fluorination of zirconia: Adhesive bond strength comparison to commercial primers / Dental Materials / Elsevier BV 28(6) : 604~608

[journal] Guilherme B. Valverde / 2013 / Surface characterisation and bonding of Y-TZP following non-thermal plasma treatment / Journal of Dentistry / Elsevier BV 41(1) : 51~59

[journal] Nelson R.F.A. Silva / 2011 / Surface characterization of Ti and Y-TZP following non-thermal plasma exposure / Journal of Biomedical Materials Research Part B: Applied Biomaterials / Wiley 99B(1) : 199~206

[journal] Yu-Ri Choi / 2013 / Surface modification of biphasic calcium phosphate scaffolds by non-thermal atmospheric pressure nitrogen and air plasma treatment for improving osteoblast attachment and proliferation / Thin Solid Films / Elsevier BV 547 : 235~240

[journal] Yu-Ri Choi / 2018 / Effect of Non-Thermal atmospheric pressure plasma on adhesion capability in cementation of composite resin inlay / Research Journal of Pharmacy and Technology / Diva Enterprises Private Limited 11(6) : 2561~

[journal] Liezl Manaloto-Ceballos / 2018 / Nonthermal plasma on the shear bond strength of relining resin to thermoplastic denture base resin / 대한치과보철학회지 / 대한치과보철학회 56(3) : 199~205

[journal] Soares CJ / 2004 / Fracture resistance of teeth restored with indirect-composite and ceramic inlay systems / Quintessence Int 35(4) : 281~286

[journal] 송미혜 / 2008 / INFLUENCE OF ADHESIVE APPLICATION ON SHEAR BOND STRENGTH OF THE RESIN CEMENT TO INDIRECT RESIN COMPOSITE / Restorative Dentistry and Endodontics / 대한치과보존학회 33(5) : 419~427

[journal] Jang BS / 2000 / Bonding of resin inlay to glass-ionomer base with various treatments on inlay surface / Restor Dent Endod 25(3) : 399~406

[journal] Shortall AC / 1996 / Composite inlay/luting resin bond strength--surface treatment effects / JDent 24(1-2) : 129~135

[journal] 한세희 / 2009 / EFFECT OF A DESENSITIZER ON DENTINAL BOND STRENGTH IN CEMENTATION OF COMPOSITE RESIN INLAY / Restorative Dentistry and Endodontics / 대한치과보존학회 34(3) : 223~231

[journal] Mahdi Akbarzadeh / 2018 / Effect of Er: YAG Laser, Sandblast and Several Types of Universal Bonding on Shear Bond Strength of Zirconia Ceramic to Composite Resin / The Journal of Contemporary Dental Practice / Jaypee Brothers Medical Publishing 19(10) : 1246~1253

[journal] Swift EJ Jr / 1994 / Effect of a silane coupling agent on composite repair strengths / Am J Dent 7(4) : 200~202

[journal] Wilmart Labriaga / 2018 / Effect of non-thermal plasma on the shear bond strength of resin cements to Polyetherketoneketone (PEKK) / The Journal of Advanced of Prosthodontics / 대한치과보철학회 10(6) : 408~414

[journal] Lee M / 2016 / Self re-evaluation of various colored drinks after tooth bleaching / J Korean Acad Dent Hyg 18(2) : 105~114

[journal] Gu H / 2009 / Comparison of light activated bleaching effect using high concentration hydrogen peroxide and carbamide peroxide / J Korean Soc Dent Hyg 11(2) : 111~120

[journal] I.E. Ruyter / 1987 / Color stability of dental composite resin materials for crown and bridge veneers / Dental Materials / Elsevier BV 3(5) : 246~251

[journal] Yavirach P / 2009 / Effects of plasma treatment on the shear bond strength between fiber-reinforced composite posts and resin composite for core build-up / Dent Mater J 28(6) : 686~692

[journal] Chen M / 2013 / Surface modification of several dental substrates by non-thermal, atmospheric plasma brush / Dent Mater 29(8) : 871~880

[journal] 엄수혁 / 2014 / Applications of Non-Thermal Atmospheric Pressure Plasma in Dentistry / 대한치과의사협회지 / 대한치과의사협회 52(12) : 783~794

This paper was written with support from the National Research Foundation of Korea.

KJCKorea
Journal Central

Journal of Korean society of Dental Hygiene 2025 KCI Impact Factor : 1.22