Microstructure of Ti-6Al-4V alloy (Ti-6Al-4V 합금의 미세구조 분석)

Tae Wan Kim (김태완); Yo Han Yoon (윤요한); Ho Ra Oh (오호라); Jong Bum Park (박종범); Jung-Il Lee (이정일); Jeong-ho Ryu (류정호)

doi:10.6111/JKCGCT.2016.26.3.126

Microstructure of Ti-6Al-4V alloy

Journal of the Korean Crystal Growth and Crystal Technology
Abbr : J. Korean Cryst. Growth Cryst. Technol.
2016, 26(3), pp.126-130
DOI : 10.6111/JKCGCT.2016.26.3.126
Publisher : The Korea Association Of Crystal Growth, Inc.
Research Area : Engineering > Materials Science and Engineering
Received : May 30, 2016
Accepted : June 17, 2016
Published : June 30, 2016

Tae Wan Kim ¹, Yo Han Yoon ¹, Ho Ra Oh ¹, Jong Bum Park ¹, Jung-Il Lee ¹, Jeong-ho Ryu ¹

¹한국교통대학교

Accredited

ABSTRACT

Ti alloys have been used for orthopedic devices, automobile and aircraft because it has several beneficial properties such as a low density, a low modulus of elasticity, excellent high-temperature strength, excellent corrosion resistance and biocompatibility. In this study, Ti-64 composition (6 wt% Al, 4 wt% V) is investigated as a representative Tialloy system on the crystallographic characteristics and microstructure. We investigated crystal structure of the Ti-64 sample by XRD, and analyzed microstructure by compositional differences measured using FE-SEM and EDX.

KEYWORDS

Ti-Al-4V alloy, α + β phase, Microstructure

Citation status

* References for papers published after 2023 are currently being built.

[journal] 이유환 / 2004 / Prediction of Microstructure During High Temperature Forming of Ti-6Al-4V Alloy / 한국군사과학기술학회지 / 한국군사과학기술학회 7(4) : 70~78

[journal] 이동근 / 2004 / Effects of Volume Fraction of Tempered Martensite on Dynamic Deformation Properties of Ti-6Al-4V Alloy Having Bimodal Microstructure / 대한금속·재료학회지 / 대한금속·재료학회 42(6) : 455~463

[journal] S. G. Pyo / 2000 / Al compositional dependence on the deformation behavior and mechanical properties in ultra high purity TiAl alloys / J. Kor. Inst. Met. & Mater 38 : 629~

[journal] I. -S. Jung / 1999 / Phase equilibria of TiAl alloy by directional solidification / J. Kor. Inst. Met. & Mater 37 : 448~

[journal] X Wu / 2006 / Review of alloy and process development of TiAl alloys / Intermetallics 14 : 1114~

[journal] M. Geetha / 2009 / Ti based biomaterials, the ultimate choice for orthopaedic implants - A review / Prog. Mater. Sci 54 : 397~

[journal] S.L.R. da Silva / 1999 / X-ray diffraction measurements of plasmanitrided Ti-6Al-4V / Surf. Coat. Tech 116-119 : 342~

[journal] J. J. Lin / 2016 / Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing / Mater. Des 102 : 30~

[journal] G. A. Ravi / 2016 / Microstructural control in a Ti-based alloy by changing laser processing mode and power during direct laser deposition / Mater. Lett 179 : 104~

[journal] D. Batalu / 2006 / Critical analysis of the Ti-Al phase diagrams / U.P.B. Sci. Bull., Series B 68 : 77~

KJCKorea
Journal Central

Journal of the Korean Crystal Growth and Crystal Technology 2023 KCI Impact Factor : 0.19

Microstructure of Ti-6Al-4V alloy

ABSTRACT

KEYWORDS

Citation status

* References for papers published after 2023 are currently being built.

Journal of the Korean Crystal Growth and Crystal Technology 2023 KCI Impact Factor : 0.19

Microstructure of Ti-6Al-4V alloy

ABSTRACT

KEYWORDS

Statistics

Tools

Issue List

Citation status

KCI Citation Counts (0)

REFERENCES (10) * References for papers published after 2023 are currently being built.

Search PDF

Citation

* References for papers published after 2023 are currently being built.