Morphology control of glassy carbon coating layer to additive ethylene glycol and phenolic resin (페놀수지 및 에틸렌 글리콜을 첨가한 유리질 카본 코팅층의 물성 제어)

Sang Hyun Joo (주상현); Young Jun Joo (주영준); Hyuk Jun Lee (이혁준); Young Jin Sim (심영진); Dong Jin Park (박동진); cho kwang youn (조광연)

doi:10.6111/JKCGCT.2022.32.3.089

Morphology control of glassy carbon coating layer to additive ethylene glycol and phenolic resin

Journal of the Korean Crystal Growth and Crystal Technology
Abbr : J. Korean Cryst. Growth Cryst. Technol.
2022, 32(3), pp.89-95
DOI : 10.6111/JKCGCT.2022.32.3.089
Publisher : The Korea Association Of Crystal Growth, Inc.
Research Area : Engineering > Materials Science and Engineering
Received : June 3, 2022
Accepted : June 15, 2022
Published : June 30, 2022

Sang Hyun Joo ¹, Young Jun Joo ¹, Hyuk Jun Lee ², Young Jin Sim ², Dong Jin Park ³, cho kwang youn ¹

¹한국세라믹기술원
²부산대학교
³(주)지티아이

Accredited

ABSTRACT

In this study, glassy carbon coating was performed on the graphite using a phenolic resin and a curing agent was mixed with ethylene glycol as an additive to form the uniform surface. The phenolic resin was dried and cured under the environments of hot air, then converted into a glassy carbon layer by pyrolysis at 500~1,500°C. FTIR, XRD, SEM analysis, and density/porosity/contact angle measurement were performed for characterization of glassy carbon. The pyrolysis temperature for high-quality glassy carbon was optimized to be about 1,000°C. As the content of the additiveincreased, the effect of reducing surface defects on the coated surface, reduction of porosity, increase of contact angle, andincrease of density were investigated in this study. The method of forming a glassy carbon coating layer through an additive is expected to be applicable to graphite coating and other fields.

KEYWORDS

Glassy carbon, Graphite coating, Phenol resin, Additive, Impregnation

Citation status

* References for papers published after 2023 are currently being built.

[journal] Y. Zhang / 2020 / Carbon block anodes with columnar nanopores constructed from amine-functionalized carbon nanosheets for sodium-ion batteries / J. Mater. Chem. A 8 : 24393~

[journal] J. Zhang / 2012 / Rigid/flexible transparent electronics based on separated carbon nanotube thin-film transistors and their application in display electronics / ACS Nano 6 : 7412~

[journal] B. Ji / 2017 / A dual-carbon battery based on potassium‐ion electrolyte / Adv. Energy Mater 7 : 1700920~

[journal] A. Obraztsov / 2003 / DC discharge plasma studies for nanostructured carbon CVD / Diam Relat Mater 12 : 917~

[journal] J. Lascovich / 1991 / Evaluation of the sp2/sp3 ratio in amorphous carbon structure by XPS and XAES / Appl. Surf. Sci 47 : 17~

[book] H. Kang / 1995 / Autoclave processing of thick carbon-phenolic composites / University of California : 950686~

[journal] Y. Wang / 2012 / SiC/ HfC/SiC ablation resistant coating for carbon/carbon composites / Surf. Coat. Technol 206 : 3883~

[journal] S. Xu / 2009 / Pore structure control of mesoporous carbon monoliths derived from mixtures of phenolic resin and ethylene glycol / Carbon 47 : 2103~

[journal] M. Choi / 2000 / The effect of coupling agent on electrical and mechanical properties of carbon fiber/phenolic resin composites / Polymer 41 : 3243~

[journal] T.H. Ko / 2000 / The influence of post‐cure on properties of carbon/phenolic resin cured composites and their final carbon/carbon composites / Polym. Compos 21 : 96~

[journal] J. Liu / 2019 / Synthesis and characterization of polyethylene glycol-phenolformaldehyde based polyurethane composite / Sci. Rep 9 : 1~

[journal] K. Manoharan / 2021 / Development of hydrophobic paper substrates using silane and sol-gel based processes and deriving the best coating technique using machine learning strategies / Sci. Rep 11 : 1~

[journal] I. Bae / 1999 / Effects of coating conditions on the thickness and morphology of alumina- or carbon-coated layers on SiC whiskers / J. Korean Ceram. Soc 36

[journal] 홍석기 / 2011 / High Pressure Curing of Phenol Resin for High Quality Coating of Glassy Carbon / 한국세라믹학회지 / 한국세라믹학회 48(2) : 141~146

[journal] M. Zabeti / 2012 / In situ catalytic pyrolysis of lignocellulose using alkali-modified amorphous silica alumina / Bioresour. Technol 118 : 374~

[journal] Y. Berro / 2019 / Atomistic description of phenol, CO and H2O adsorption over crystalline and amorphous silica surfaces for hydrodeoxygenation applications / Appl. Surf. Sci 494 : 721~

[journal] H. Yi / 2001 / Adsorption stripping voltammetry of phenol at Nafion-modified glassy carbon electrode in the presence of surfactants / Talanta 55 : 1205~

[journal] H. Jiang / 2012 / The pyrolysis mechanism of phenol formaldehyde resin / Polym. Degrad. Stab 97 : 1527~

[journal] G. Pulci / 2010 / Carbon-phenolic ablative materials for re-entry space vehicles: Manufacturing and properties / Compos. Part A Appl. Sci. Manuf 41 : 1483~

[journal] I.E. Mülazımoğlu / 2011 / Determination of quantitative phenol in tap water samples as electrochemical using 3, 3'-diaminobenzidine modified glassy carbon sensor electrode / Desalination 268 : 227~

[journal] L. Wang / 2006 / Simultaneous electrochemical determination of phenol isomers in binary mixtures at a poly (phenylalanine) modified glassy carbon electrode / Int. J. Electrochem. Sci 1 : 403~

KJCKorea
Journal Central

Journal of the Korean Crystal Growth and Crystal Technology 2023 KCI Impact Factor : 0.19

Morphology control of glassy carbon coating layer to additive ethylene glycol and phenolic resin

ABSTRACT

KEYWORDS

Citation status

* References for papers published after 2023 are currently being built.

Journal of the Korean Crystal Growth and Crystal Technology 2023 KCI Impact Factor : 0.19

Morphology control of glassy carbon coating layer to additive ethylene glycol and phenolic resin

ABSTRACT

KEYWORDS

Statistics

Tools

Issue List

Citation status

KCI Citation Counts (0)

REFERENCES (21) * References for papers published after 2023 are currently being built.

Search PDF

Citation

* References for papers published after 2023 are currently being built.