본문 바로가기
  • Home
Basic Search

A Study on the Adjustment Method of Bicycle Shoe Cleat for Bicycle Fitting System

  • Journal of The Korea Society of Computer and Information
  • Abbr : JKSCI
  • 2019, 24(5), pp.93-102
  • DOI : 10.9708/jksci.2019.24.05.093
  • Publisher : The Korean Society Of Computer And Information
  • Research Area : Engineering > Computer Science
  • Received : March 18, 2019
  • Accepted : April 30, 2019
  • Published : May 31, 2019

Gyoung-Hoan Shon 1

1수원여자대학교

Accredited

ABSTRACT

The nation's fraternity and elite players who have built up a global bicycle infrastructure often find it to be a problem with the bicycle's speed and speed reduction, pain in knees and hip joints, or even with the bike itself, or with the bike's own physical defects or a riding posture. However, we found that most cases of cleat adjustment errors were likely to be true. Accurate adjustment of the cleats is the most important of the entire fitting process and can be the basis for improving the ability of the bicycle rider and preventing injury. Therefore, the study was intended to give a prior study of bicycle fitting, which can improve bicycle efficiency and prevent injury when riding bicycle, and specific ways of adjusting bicycle shoe cleats, and the following results were obtained. First, the cleat characteristics of Shimano, LOOK and Speedplay, which are currently used in public, and the characteristics during the cleat adjustment process, were derived. In addition, the structure and characteristics of dedicated shoes using cleats and the method of using pedalling by the structure of shoes after adjusting the cleats were derived. Second, the position of the shoe and its relationship with torque in pedalling was discussed, and the method of adjusting front and back of cleats was derived. Third, leg length, ASIS, Q-Angle and Q-factor etc. were analyzed and the method of setting and adjusting cleat left and right values were derived. Fourth, the relationship between walking angle and cleat rotation was analyzed, the method was derived, and the torque size and angle behind the cleat adjustment were compared and analyzed using the spinner to indicate the torque and the effective mean torque angle after the cleat adjustment.

Statistics

  • 403 Viewed
  • 122 Downloaded

Tools

Issue List

Citation status

* References for papers published after 2023 are currently being built.

Basic Search Advanced Search