Development of an Auto-Build and a Version Management System for a Fly-By-Wire Model of a Rotorcraft (헬리콥터용 전자식 비행제어 모델에 대한 자동빌드도구와 버전관리시스템 개발)

Ho-Chae Jung (정호채); BAEJONGMIN (배종민)

doi:10.34163/jkits.2017.12.4.007

Development of an Auto-Build and a Version Management System for a Fly-By-Wire Model of a Rotorcraft

Journal of Knowledge Information Technology and Systems
Abbr : JKITS
2017, 12(4), pp.529-537
DOI : 10.34163/jkits.2017.12.4.007
Publisher : Korea Knowledge Information Technology Society
Research Area : Interdisciplinary Studies > Interdisciplinary Research
Published : August 31, 2017

Ho-Chae Jung ¹, BAEJONGMIN ²

¹APPIA ENGINEERING
²경상대학교

Accredited

ABSTRACT

The dynamics models and the flight control models are developed on non-real time operating system environment in its first development step when we build a fly-by-wire flight control system. These models are built on a Handling Quality Simulator(HQS) in the next step which is a virtual simulator to be operated in real-time environment that is similar to the real system. A pilot makes quantitative and qualitative assessment for testing the controllability of the models operating in the HQS. In this case the model build process is complex and time consuming. Moreover it is difficult to compare the previous version of models because of the continuous model modifications. In this paper, we present design and implementation result of an auto-build tool which is used for building the flight control models and dynamic models on the top of the HQS, and also present the version management system of models which can be used for comparing models immediately. The auto-build tool can reduce model build time and enhance system reliability. It makes engineers concentrate on only model development itself. The version management system can reduce model testing time and make model insertion, modification and deletion easily. Thus our system can improve development productivity by reducing the model build and testing time.

KEYWORDS

Fly-by-wire, Model build, Rotorcraft, Flight control model, Version management, HQS, Model based design

Citation status

* References for papers published after 2023 are currently being built.

[other] Tom Erkkinen / 2003 / Simulink capabilities for embedded code generation / The Mathworks

[confproc] S-J An / 2012 / A process and tool development of auto generated code for fly-by-wire helicopter flight control law / Proceedings of The Korea Society for Aeronautical and Space Science : 1185~1189

[confproc] C-S Kim / 2012 / A study on verification of auto code for UAV flight control law software / Proceedings of The Korea Society for Aeronautical and Space Science : 417~422

[confproc] J-H Park / 2008 / Evaluation technique and automating code development of handling quality for conventional aircraft / Proceeding of The Korea Society for Aeronautical and Space Science : 1278~1282

[other] D. W. Nixon / 2004 / Flight control law development for the F-35 JointStrike flight / Lockheed-MartinAeronautics

[journal] 안성준 / 2013 / A Development and Verification Process of Auto Generated Code for Fly-By-Wire Helicopter Control Law / 한국항공우주학회지 / 한국항공우주학회 41(6) : 488~494

[other] / 2000 / Handling quality requirements for military rotorcraft, Aeronautical Design Standard Performance Specification ADS-33E-PRF

[confproc] L. R Stiles / 2004 / Impossible to resist; The development of rotorcraft fly-by-wire technology / American Helicopter Society 60 th Annual Forum

[confproc] S. I. Glusman / 1986 / Handling qualities evaluation of the ADOCS primary flight control system / American Helicopter Society 42nd Annual Forum

[confproc] J. Harding / 2006 / Development of modern control laws for the AH-64D in hover/low speed flight / American Helicopter Society 62nd Annual Forum

[journal] K. H Landis / 1994 / Advanced flight control technology achievements at Boeing helicopters / International Journal of Control 59(1) : 263~290

[confproc] B. Boczar / 1999 / Key aspects and attributes of the RAH-66 Comanche flight control system / American Helicopter Society 55th Annual Forum

[journal] 김종섭 / 2012 / Design and Validation of Model Inversion Flight Control Law for Fly By Wire Helicopter / 한국항공우주학회지 / 한국항공우주학회 40(8) : 678~687

[confproc] C-S Kim / 2011 / A study on fly-by-wire flight control law development environment / Proceedings of The Korea Society for Aeronautical and Space Science : 648~653

[journal] K-C Park / 2012 / Development for handling quality test environment of rotorcraft fly-by-wire flight control system / Proceeding of The Korea Society for Aeronautical and Space Science : 1190~1194

KJCKorea
Journal Central

Journal of Knowledge Information Technology and Systems 2023 KCI Impact Factor : 0.89

Development of an Auto-Build and a Version Management System for a Fly-By-Wire Model of a Rotorcraft

ABSTRACT

KEYWORDS

Citation status

* References for papers published after 2023 are currently being built.

Journal of Knowledge Information Technology and Systems 2023 KCI Impact Factor : 0.89

Development of an Auto-Build and a Version Management System for a Fly-By-Wire Model of a Rotorcraft

ABSTRACT

KEYWORDS

Statistics

Tools

Issue List

Citation status

KCI Citation Counts (0)

REFERENCES (15) * References for papers published after 2023 are currently being built.

Search PDF

Citation

* References for papers published after 2023 are currently being built.